International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA J-ROBOT-34235 single-phase welding transformer 48 kVA

The TECNA J-ROBOT-34235 is a 48 kVA single-phase transformer for robotic resistance welding guns and automatic welding stations. It is made in Italy with liquid cooling and epoxy resin cast windings. The unit conforms to ISO 5826, ISO 10656 and ISO 22829.

Brand
TECNA
Country of manufacture
Italy
Model (code)
J-ROBOT-34235
Type
single-phase welding transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA J-ROBOT-34235 is rated at 48 kVA and carries the J-ROBOT prefix, which places it among units for robotic resistance welding. Among the maker's robot transformers it sits at the lower end by power. 48 kVA is enough for guns that weld thin and medium sheet without adding much mass to the robot arm. The circuit is single-phase and runs on alternating current.

In a robotic cell the transformer runs through frequent cycles with no operator involved, so liquid cooling is essential. Its mass and dimensions load the robot arm, and the cables and hoses are routed through the cable package. The gun parameters and robot compatibility should be agreed with TECNA against the model code.

The J-ROBOT-34235 is liquid cooled and has its body cast in epoxy resin. For the machine this means connecting to a coolant loop with clean fluid and stable pressure, while the resin protects the windings from moisture, dust and vibration. The maker manufactures these transformers entirely in Italy from selected and certified suppliers.

TECNA states that its transformers are built to ISO 5826, ISO 10656 and ISO 22829, which cover resistance welding equipment. The broader range includes three-phase direct current units up to 1500 kVA, inverter direct current units up to 664 kVA and special transformers for particular tasks. Single-phase alternating current models are part of the same family.

To select a J-ROBOT-34235, gather the mains voltage and frequency, the required secondary voltage, the welding type and the coolant connection arrangement. TECNA states 48 kVA for the code and confirms the remaining parameters. The welding current is set by a phase-control unit working through thyristors, so when upgrading a machine, check the controller and the secondary busbars together with the transformer. For a replacement, send a photo of the old nameplate.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)J-ROBOT-34235
Typesingle-phase welding transformer for resistance welding
Power48 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin cast
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding machines, heating, upsetting

Request a price and lead time

TECNA J-ROBOT-34235 single-phase welding transformer 48 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power rating of the TECNA J-ROBOT-34235?

The manufacturer gives the J-ROBOT-34235 a rating of 48 kVA on a single-phase alternating current supply. TECNA confirms the primary and secondary voltages against the model code.

Does the J-ROBOT-34235 need separate cooling?

Yes, every TECNA transformer is liquid cooled, so the unit must be connected to a coolant circuit before it is used.

What does the J-ROBOT prefix mean?

The prefix places the model among units for robotic welding. Compatibility with a specific gun and robot is agreed with TECNA against the J-ROBOT-34235 code.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides