International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA Hydraulic 1500 portal frame resistance welder, 2×250 kVA

The TECNA Hydraulic 1500 is a portal frame resistance welder with a hydraulic drive and two 250 kVA transformers. Its secondary voltage is set in three steps, 9.5 V, 10.6 V and 11.75 V. It is intended for large components that need a rigid frame and high clamping force.

Brand
TECNA
Country of manufacture
Italy
Model
Hydraulic 1500
Type
portal frame resistance welding machine

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The Hydraulic 1500 differs from other TECNA portal machines in its power arrangement. It carries two welding transformers of 250 kVA each, recorded as 2×250 kVA. The secondary voltage is set in three steps, 9.5 V, 10.6 V and 11.75 V, and the step is picked to suit the resistance of the welding loop and the current that a particular component needs.

In a portal layout the welding head moves within a frame above the table, while the component rests on the work surface. Unlike press machines with cantilever arms, a portal has no throat that bends under load, so the force travels through the frame. Machines of this type are chosen when the part is large and flat, or when a single stroke has to press it with considerable force.

The drive is hydraulic, as the model name indicates. Hydraulics give more clamping force than a pneumatic cylinder and hold that force steadily through the welding cycle. Two transformers allow two groups of electrodes to be supplied, or current to be brought in from two sides of a large component.

The manufacturer states the power and the secondary voltage steps for the Hydraulic 1500. Work surface size, force, stroke and control configuration are confirmed on request, so for selection send the drawing of the component, its material and thickness, the joint type and the required cycle rate. These details show whether the Hydraulic 1500 suits the job or whether another machine from the portal range is needed.

Connecting a portal machine is prepared in advance. The site needs a power supply sized for two transformers, a cooling water circuit, and a place for the frame and the hydraulic power unit.

Technical specifications

BrandTECNA
Country of manufactureItaly
ModelHydraulic 1500
Typeportal frame resistance welding machine
Drivehydraulic
Power2×250 kVA
Secondary voltage9.5 V, 10.6 V, 11.75 V

Request a price and lead time

TECNA Hydraulic 1500 portal frame resistance welder, 2×250 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power of the TECNA Hydraulic 1500?

The machine has two transformers, and its power is stated as 2×250 kVA.

What secondary voltage steps are available?

The manufacturer gives three values: 9.5 V, 10.6 V and 11.75 V.

Which components suit a portal machine?

Large flat components that need a rigid frame and high clamping force. The exact TECNA configuration is selected from the drawing, material and thickness of the part.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides