International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA HY120 hybrid resistance welding system with storage and inverter, 120 kA

The TECNA HY120 stores energy in capacitors and uses an inverter to deliver welding current of up to 120 kA from a 32 A supply line. It suits sites from small workshops to large plant halls in mechanical engineering.

Brand
TECNA
Country
Italy
Model
HY120
Type
hybrid resistance welding system (energy store plus inverter)

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The HY120 is built on TECNA's hybrid technology, in which energy is held in capacitors and an inverter shapes it into the welding pulse. The system is rated at 2500 kVA with a secondary voltage of 23 V, a short-circuit current of 120 kA and an electrode force of 3500 daN. Thanks to the constant energy store, it delivers currents above 100 kA while connected to a 32 A line. The manufacturer is the Italian company TECNA.

Weld quality does not depend on the condition of the mains, since the weld is drawn from the store and not from the supply. The load is balanced across all three phases without skew, and the system works independently of mains frequency. If a phase is lost or behaves abnormally, the machine signals it.

Compared with a conventional resistance welding system, the HY120 draws a much smaller current from the line, so the installed power at the site can be reduced. Welding time is shorter than on a classic alternating current machine, so electrodes need servicing less often and output rises. Together these lower the running costs.

Current is controlled through dual feedback: every 500 microseconds the system compares the set current with the actual one, measured in parallel on the primary and secondary sides of the welding transformer. The machine adapts flexibly to the material being welded.

Dynamic mode works as an adaptive inverter mode. During the weld the machine detects deviations such as incomplete sheet contact, dirt between the parts and electrode wear. The control unit changes the process on the fly, extends the weld time up to the limit the operator has set, and adjusts the current so that a sound spot forms without molten metal being expelled and weakening the joint. The maker therefore regards the HY120 as suitable for any site, from small workshops to large halls of mechanical engineering plants, since it needs no heavy supply and still keeps spot quality.

Technical specifications

BrandTECNA
CountryItaly
ModelHY120
Typehybrid resistance welding system (energy store plus inverter)
Power2500 kVA
Secondary voltage23 V
Short circuit current120 kA
Electrode force3500 daN
Connection3 phases, balanced load, 32 A line
Current controldual feedback, check every 500 microseconds
ModesDynamic mode, adaptive

Request a price and lead time

TECNA HY120 hybrid resistance welding system with storage and inverter, 120 kA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which supply line does the TECNA HY120 need?

Thanks to its energy store the machine delivers currents above 100 kA from a 32 A line, with the load shared evenly across three phases.

What does Dynamic mode do on the HY120?

It detects incomplete sheet contact, dirt and electrode wear, extends the weld time up to the operator's limit and corrects the current so the weld forms without expulsion.

How is the current controlled on the HY120?

By dual feedback: every 500 microseconds the system compares the set and actual current on the primary and secondary sides of the transformer.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides