
TECNA HY100 hybrid capacitor discharge welder, 2500 kVA, 120000 A
The HY100 sits at the top of the TECNA hybrid range, combining capacitor discharge with inverter technology for heavy projection welding. It delivers a maximum output current of 120000 A and a linear press force of 3500 daN.
- Brand
- TECNA
- Country
- Italy
- Model
- HY100
- Type
- hybrid capacitor discharge welder (CD plus inverter), linear press
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The HY100 is the top model of TECNA's hybrid range, rated at 2500 kVA with a secondary voltage of 23 V, an electrode force of 3500 daN and a maximum output current of 120000 A. The smaller machines in the range deliver less current and force, so the HY100 is chosen for heavy parts and projection welds with many raised points, where both current and pressure need a margin. The manufacturer is the Italian company TECNA.
The design rests on the same pairing as the rest of the hybrid line: capacitor discharge (CD) combined with the maker's inverter technology. The capacitors bank energy between cycles and release it in a pulse, so the machine draws little from the mains and does not need a large connected power. TECNA states up to 50% weld energy efficiency for the inverter side.
Current reaches its peak in a minimal time, so heat stays in the contact zone. The 23 V secondary voltage is intended for projection welding, where the resistance of several projections and a thick stack is higher than in ordinary spot welding. The maker ties the high current directly to heavy welded joints.
The press is linear, and its 3500 daN force holds the parts together during and after the pulse, which matters for large sections. All safety options and accessories from the maker's programme are available for the HY100, from guarding to tooling, so the machine is put together around a specific product and work area.
Typical use covers projection welding of heavy and structural parts and other joints with a large section. The low mains draw makes the HY100 suitable for shops where a conventional alternating current machine with that output would need a dedicated substation or a major rebuild of the supply. Enquiries should describe the part, its material, the number and size of the projections, the current needed and the working rate, from which the press and tooling are configured.
Technical specifications
| Brand | TECNA |
|---|---|
| Country | Italy |
| Model | HY100 |
| Type | hybrid capacitor discharge welder (CD plus inverter), linear press |
| Power | 2500 kVA |
| Max output current | 120000 A |
| Secondary voltage | 23 V |
| Electrode force | 3500 daN |
| Weld energy efficiency | up to 50% |
| Applications | projection welding, heavy welded joints |
Request a price and lead time
TECNA HY100 hybrid capacitor discharge welder, 2500 kVA, 120000 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What current and force does the TECNA HY100 deliver?
A maximum output current of 120000 A and an electrode force of 3500 daN at 2500 kVA.
How does the HY100 differ from the smaller machines in the range?
The HY100 has the highest current, secondary voltage and press force in the range, and is used for heavy parts and heavy projection welding.
Which joints is the HY100 intended for?
The maker points it at projection welding and heavy welded joints, where a large current is needed for a short time.
Similar equipment from other manufacturers






