
TECNA HY060 hybrid resistance welding system with store, 60 kA, 1080 kVA
The TECNA HY060 is a hybrid system pairing a capacitor energy store with an inverter for resistance welding at a short-circuit current of 60 kA. It draws little from the mains and works in both small workshops and large plants.
- Brand
- TECNA
- Country
- Italy
- Model
- HY060
- Type
- hybrid resistance welding system (energy store plus inverter)
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The HY060 is one of TECNA's hybrid systems, in which an energy store works together with an inverter. It is rated at 1080 kVA with an 18 V secondary, a short-circuit current of 60 kA and an electrode force of 736 daN. Lower in current and force than the top models, it is chosen for parts of medium section where the full output of a larger machine is not required. The manufacturer is the Italian company TECNA.
The main difference from a conventional alternating current machine is the way it is powered. The capacitors store energy continuously, so the machine takes a small, steady draw from the mains rather than a peak during every weld. The maker states that this principle delivers welding currents above 100 kA from a 32 A line.
The process is independent of the condition of the mains. Dips and fluctuations in voltage do not alter the spot, so quality stays stable. The machine loads all three phases evenly, works regardless of mains frequency, and gives a signal when one phase is lost or runs outside tolerance.
Current is checked every 500 microseconds by dual feedback, measured in parallel on the primary and secondary windings of the welding transformer. If the actual value strays from the set point, the system sees it within a single pulse. Weld times are shorter than on classic alternating current machines, so electrodes need servicing less often.
Dynamic mode responds to poor sheet contact, dirt between the parts and electrode wear. The control unit corrects the current and, when needed, lengthens the weld up to the limit set by the operator, aiming for a correct spot without the expulsion of metal that weakens the joint. Low and evenly spread consumption, combined with stable quality, makes the HY060 suitable for both a small workshop and a large mechanical engineering plant where the supply is already loaded by other equipment.
Technical specifications
| Brand | TECNA |
|---|---|
| Country | Italy |
| Model | HY060 |
| Type | hybrid resistance welding system (energy store plus inverter) |
| Power | 1080 kVA |
| Secondary voltage | 18 V |
| Short circuit current | 60 kA |
| Electrode force | 736 daN |
| Connection | 3 phases, balanced load, 32 A line |
| Current control | dual feedback, check every 500 microseconds |
| Modes | Dynamic mode, adaptive |
Request a price and lead time
TECNA HY060 hybrid resistance welding system with store, 60 kA, 1080 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What current and force does the TECNA HY060 deliver?
A short-circuit current of 60 kA and an electrode force of 736 daN at 1080 kVA and an 18 V secondary voltage.
Do mains fluctuations affect HY060 welding?
No. The process draws on the energy store, so spot quality does not depend on mains fluctuations. The machine also signals a lost phase.
Does the HY060 need a separate heavy supply line?
The maker states that the hybrid principle gives welding currents above 100 kA from a 32 A line, with an even load across three phases.
Similar equipment from other manufacturers






