
TECNA HY050 hybrid capacitor discharge welder, 1080 kVA, 60000 A
The TECNA HY050 pairs capacitor discharge with the maker's inverter technology in a linear press resistance welder. It is built for projection welding and heavy joints, with a maximum output current of 60000 A.
- Brand
- TECNA
- Country
- Italy
- Model
- HY050
- Type
- hybrid capacitor discharge welder (CD plus inverter), linear press
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Within the TECNA hybrid range, the HY050 is rated at 1080 kVA, with a secondary voltage of 18 V, an electrode force of 736 daN and a maximum output current of 60000 A. Larger machines in the range offer more current and force, so the HY050 suits parts that do not need that margin. The manufacturer is the Italian company TECNA.
The machine combines two of TECNA's technologies. From capacitor discharge (CD) it takes low energy absorption and minimal power demand, because the energy is stored in capacitors between cycles. From the maker's inverter technology it takes weld energy efficiency, which TECNA puts at up to 50%.
Current reaches its maximum very quickly, so heat stays concentrated at the contact and has less time to spread through the part. The maker stresses a high secondary voltage for projection welding and a high current for heavy welds. On projection parts with several raised points, this helps every point heat at almost the same time.
The mechanics are a linear press with ample force, and all safety options and accessories from the maker's programme are available for the HY050. Machines are normally configured for the specific site, covering guarding, tooling and feed devices. Typical work covers projection welding and heavy joints where a large current is needed in a short time. Because the connected power demand is low, the HY050 also suits workshops with a limited mains supply, where an alternating current machine of the same output would need a far larger supply. Enquiries should state the material and section of the parts, the number of projections, the current needed and the working rate, so the fit of the HY050 can be checked.
Technical specifications
| Brand | TECNA |
|---|---|
| Country | Italy |
| Model | HY050 |
| Type | hybrid capacitor discharge welder (CD plus inverter), linear press |
| Power | 1080 kVA |
| Max output current | 60000 A |
| Secondary voltage | 18 V |
| Electrode force | 736 daN |
| Weld energy efficiency | up to 50% |
| Applications | projection welding, heavy welded joints |
Request a price and lead time
TECNA HY050 hybrid capacitor discharge welder, 1080 kVA, 60000 A. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the maximum current of the TECNA HY050?
The maximum output current is 60000 A at 1080 kVA and a secondary voltage of 18 V.
What electrode force does the HY050 deliver?
The linear press develops 736 daN on the electrodes, which is enough for projection welding and heavy joints.
Does the HY050 need a heavy-duty mains supply?
No. Capacitor discharge lowers the draw from the mains and the connected power demand, because energy is stored between cycles.
Similar equipment from other manufacturers






