International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA H-ROBOT-39202 single-phase welding transformer, 36 kVA

Single-phase TECNA H-ROBOT-39202 transformer rated at 36 kVA for resistance welding machines. Liquid cooling and epoxy resin encapsulated windings, made in Italy. Suited to robotic tongs and automatic resistance welding stations.

Brand
TECNA
Country of manufacture
Italy
Model code
H-ROBOT-39202
Type
single-phase transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA H-ROBOT-39202 is rated at 36 kVA and carries the H-ROBOT prefix, so it belongs to the group of transformers designed for robotic welding. Its output is lower than that of the J-ROBOT models, yet within the H-ROBOT group it is slightly stronger than the lightest unit. That margin is useful for longer current cycles or a somewhat greater tong reach on thin sheet.

For robotic welding the H-ROBOT-39202 is matched to the tongs: reach of the arms, the cross-section of the secondary busbars and the current needed at the weld point determine whether 36 kVA is enough. The robot works without operator pauses, so the coolant circuit has to keep flowing for as long as the cell runs.

The construction of the TECNA H-ROBOT-39202 is typical of TECNA welding transformers: liquid cooling and an epoxy resin encapsulation. An encapsulated unit copes better with machine vibration, moisture and shop dust, while the liquid removes heat from the windings and the secondary turn during series production. The coolant circuit has to be connected with the required flow rate before installation.

Standards ISO 5826, ISO 10656 and ISO 22829 apply to this transformer. The same family covers three-phase DC models up to 1500 kVA, inverter DC models up to 664 kVA and special versions for particular duties.

In the welding circuit the thyristor phase-control unit sets the current, while the transformer reduces mains voltage to the secondary level and boosts the current. A replacement is normally checked together with the controller and the secondary busbars. To confirm the match, the machine data are needed: mains voltage and frequency, secondary voltage, welding type and coolant parameters. The manufacturer publishes only the 36 kVA rating for this model, and a photo of the installed unit helps verify the fit.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model codeH-ROBOT-39202
Typesingle-phase transformer for resistance welding
Power36 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin encapsulation
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding machines, heating, upsetting

Request a price and lead time

TECNA H-ROBOT-39202 single-phase welding transformer, 36 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power rating of the TECNA H-ROBOT-39202?

The manufacturer gives 36 kVA for the H-ROBOT-39202, a single-phase unit on alternating current. TECNA confirms the primary and secondary voltages against the model code.

Does the transformer need separate cooling?

Yes, every TECNA transformer is liquid cooled, so the machine must be connected to a coolant circuit.

What does the H-ROBOT prefix mean?

The prefix places the model among units built for robotic welding. Compatibility with particular tongs and robots is agreed with TECNA against the H-ROBOT-39202 code.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides