
TECNA H-ROBOT-32526 single-phase welding transformer, 32 kVA
Single-phase TECNA H-ROBOT-32526 transformer rated at 32 kVA for resistance welding machines. Liquid cooling and epoxy resin encapsulated windings, made in Italy. Suited to robotic tongs and automatic resistance welding stations.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model code
- H-ROBOT-32526
- Type
- single-phase transformer for resistance welding
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA H-ROBOT-32526 is rated at 32 kVA and carries the H-ROBOT prefix, which places it among units for robotic welding. Compared with the J-ROBOT transformers, its lower output comes with a smaller overall size. It suits light robot tongs and thin sheet, where the mass on the robot arm matters and a large current reserve is not required.
The transformer travels with the arm of the robot, so the mass, the mounting and the routing of the coolant hoses all matter for the H-ROBOT-32526. The 32 kVA rating determines what current the tongs can deliver at a given reach. The cycle on a robotic line is short and frequent, and the coolant circuit carries the heat away.
The cooling of the TECNA H-ROBOT-32526 is liquid, its windings are encapsulated in epoxy resin, and the whole unit is made in Italy. An encapsulated transformer tolerates the conditions of a welding shop better, and the liquid circuit keeps the winding temperature steady through frequent cycles. Connecting the coolant circuit is part of the machine installation.
The reference standards for the TECNA H-ROBOT-32526 and the company's other transformers are ISO 5826, ISO 10656 and ISO 22829. The single-phase AC line ends at 400 kVA, after which come three-phase DC transformers up to 1500 kVA. Inverter DC transformers are made up to 664 kVA.
In the machine, the controller switches the primary winding through thyristors for a set time, and the secondary side, connected by busbars to the arms and electrodes, produces a large current at low voltage. The cross-section of the busbars, the length of the arms and the window area determine how much of the transformer's output reaches the weld point. The model page gives only the 32 kVA rating, so the primary and secondary voltages, dimensions and mass should be confirmed against the model code. When making a request, state the mains voltage, the type of machine the transformer is for and, for a replacement, the data from the old unit's rating plate.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model code | H-ROBOT-32526 |
| Type | single-phase transformer for resistance welding |
| Power | 32 kVA |
| Technology | single-phase, alternating current |
| Cooling | liquid |
| Winding insulation | epoxy resin encapsulation |
| Standards | ISO 5826, ISO 10656, ISO 22829 |
| Applications | resistance welding machines, heating, upsetting |
Request a price and lead time
TECNA H-ROBOT-32526 single-phase welding transformer, 32 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the power rating of the TECNA H-ROBOT-32526?
The manufacturer gives 32 kVA for the H-ROBOT-32526, a single-phase unit on alternating current. TECNA confirms the primary and secondary voltages against the model code.
Does the transformer need separate cooling?
Yes, every TECNA transformer is liquid cooled, so the machine must be connected to a coolant circuit.
What does the H-ROBOT prefix mean?
The prefix places the model among units built for robotic welding. Compatibility with particular tongs and robots is agreed with TECNA against the H-ROBOT-32526 code.
Similar equipment from other manufacturers






