
TECNA C-Type 2915 Ø100 Robot Pneumatic Spot Welding Gun, 840 daN, 56 or 90 kVA
TECNA C-Type 2915 Ø100 is a pneumatic robot spot welding gun with a C-shaped frame. It gives 840 daN electrode force and can be fitted with a 56 or 90 kVA transformer.
- Brand
- TECNA (Italy)
- Model
- C-Type 2915 Ø100
- Gun type
- Robot welding gun
- Drive
- Pneumatic
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 2915 in the Ø100 version is the only C-shaped model among these pneumatic robot guns from TECNA. Rather than two arms on a common axis, it has a fixed C-shaped frame with a moving electrode that travels in a straight line towards the fixed electrode. The manufacturer gives a single maximum force value for it, 840 daN, with no range of steps.
Straight electrode travel suits spots that must be made square to the plane of the sheet, with the electrodes meeting without sideways shift. It is used on flat areas, profile flanges and assemblies that the robot can reach from one side. For deep access behind a flange, scissor-type guns are usually preferred, while the C-type is placed where precise compression geometry matters most.
The electrical part is selectable. A 56 kVA transformer gives a secondary voltage of 8.4 V, a thermal current of 4.9 kA and a short-circuit current of 25 kA. The 90 kVA transformer gives 9.9 V, 6.1 kA and 32 kA. The thermal current governs continuous running without overheating, and the short-circuit current is the limiting value for a short pulse.
The drive is pneumatic: a cylinder moves the electrode and the force is set by air pressure. For a robot cell this is a simple arrangement with valve control and a fast compression and release cycle. TECNA assembles the gun from available transformers, cylinders and frames for a specific assembly. The throat depth and frame reach are chosen so the robot can access every point of the part without repositioning, and the transformer is matched to the sheet thickness and coating. It is applied to robotic spot welding and automation.
Technical specifications
| Brand | TECNA (Italy) |
|---|---|
| Model | C-Type 2915 Ø100 |
| Gun type | Robot welding gun |
| Drive | Pneumatic |
| Welding type | Spot welding |
| Power | 56 kVA, 90 kVA |
| Secondary voltage | 8.4 V, 9.9 V |
| Thermal current | 4.9 kA, 6.1 kA |
| Short-circuit current | 25 kA, 32 kA |
| Max. weld force | 840 daN |
Request a price and lead time
TECNA C-Type 2915 Ø100 Robot Pneumatic Spot Welding Gun, 840 daN, 56 or 90 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
How does the C-Type 2915 differ from X-shaped guns?
Its moving electrode travels in a straight line towards the fixed one on a C-shaped frame, with no scissor opening of the arms.
What electrode force does the 2915 deliver?
The manufacturer gives one value, 840 daN.
Which transformers are available?
A 56 kVA unit with 8.4 V, a thermal current of 4.9 kA and a short-circuit current of 25 kA, or a 90 kVA unit with 9.9 V, 6.1 kA and 32 kA.
Similar equipment from other manufacturers






