International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 8216D single-phase spot and projection linear action welder, 160 kVA, 800 mm reach

Single-phase TECNA 8216D spot and projection welder with a linear action head, rated at 160 kVA. It has the longest electrode reach in its group, 800 mm, and a 30 kA short-circuit current. Installed as a stationary workstation with a pneumatic drive, pedal control and the TE550 microprocessor unit.

Brand
TECNA
Model
8216D
Country of manufacture
Italy
Type
single-phase linear action resistance welder

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Among the three TECNA 160 kVA machines, the 8216D has the longest arms, with an electrode reach of 800 mm. That reach is chosen when a spot must sit far from the edge of a large panel, rim or box, or when a part will not pass into a short-reach throat. The trade-off for the long reach is a lower short-circuit current, 30 kA here, which is below the figure for the shorter-reach models of the same rating. The thermal current is 9.3 kA and the secondary voltage 12.1 V.

The modular frame, arms, brackets and cylinders are built from standard units. The chrome-plated rod is designed for heavy service and long life, and the anti-rotation device can be adjusted. Pneumatics need no lubrication, so the air stays free of oil mist. For setup the head is lowered without pressure, so electrodes can be aligned without applying clamping force.

The double-stroke cylinder is switched with a key, so the electrodes can be opened to full height between short working strokes. The compressed air filter and receiver sit inside the machine, with a separate device to cut the air. Valves set electrode speed, a damper absorbs the stroke end and silencers reduce exhaust noise. The two-stage electric pedal clamps the part first and welds only when the part is in the right position, and the machine can take an extra two-stage pedal that calls programme No. 2 directly.

The power section is water cooled from the transformer through to the electrodes, and the transformer windings are epoxy resin encapsulated. The TE550 microprocessor control unit regulates DC welding current. The synchronous SCR contactor is separated from the water circuit and protected by a thermostat. Two-hand safety control with a timer and a removable key selector is standard on all models; its push buttons are standard on projection versions and on request for spot versions.

The manufacturer lists two electrode forces, 736 daN and 1242 daN, with 736 daN from the standard cylinder. The 1242 daN cylinder comes under option 8235, a two-stage cylinder of 125 mm diameter with a 100 mm stroke, which the manufacturer ties to models 8201D..09D and 8214D, so the cylinder for this machine is specified on order. Further options are 8230, 8232, 8234, 8236, 8237, 8238, 8239 and 8240, and a constant-energy control unit is offered separately.

Technical specifications

BrandTECNA
Model8216D
Country of manufactureItaly
Typesingle-phase linear action resistance welder
Welding typespot and projection
Power160 kVA
Short-circuit current30 kA
Thermal current9.3 kA
Secondary voltage12.1 V
Max. electrode reach800 mm
Electrode force736 daN, 1242 daN
Driveair-operated double-stroke cylinder
Coolingwater: transformer, plates, electrode holders, electrodes
Control unitTE550 microprocessor, DC current
Contactorsynchronous SCR with thermostat
Options8230, 8232, 8234, 8235, 8236, 8237, 8238, 8239, 8240

Request a price and lead time

TECNA 8216D single-phase spot and projection linear action welder, 160 kVA, 800 mm reach. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What are the reach and current of the TECNA 8216D?

The maximum electrode reach is 800 mm, the short-circuit current is 30 kA and the thermal current is 9.3 kA at 160 kVA.

What electrode force does the 8216D give?

The manufacturer quotes 736 daN from the standard cylinder and 1242 daN. Option 8235 with the 1242 daN cylinder is tied to models 8201D..09D and 8214D, so the cylinder for this model is specified on order.

Can the TECNA 8216D do projection welding?

Yes, the manufacturer lists spot and projection welding. Two-hand push buttons are standard on projection versions.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides