International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 8201D 63 kVA spot and projection welder

The TECNA 8201D from the 8201D to 8216D range handles spot and projection welding at 63 kVA. It is a modular single-phase linear action machine with water cooling, a TE550 microprocessor control unit and electrode force up to 1242 daN.

Brand
TECNA
Country of manufacture
Italy
Series
8201D to 8216D
Model
8201D

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 8201D belongs to the 8201D to 8216D range, rated at 63 kVA with four secondary voltage steps: 5 V, 5.6 V, 6.3 V and 7.1 V. The short-circuit current is 40 kA and the thermal current is 6.2 kA. Electrode reach is 390 mm, and electrode force is 736 daN with the standard cylinder or 1242 daN with the 8235 cylinder. Both spot and projection modes are available.

The frame is built from modules: base, arms, brackets and cylinders. For setup and servicing the head can be lowered without pressure. The chrome plated cylinder rod is made for heavy duty, an adjustable device stops it turning, and the pneumatic components run without lubrication and release no oil mist. The double-stroke action is switched by key. An integrated filter with an air receiver cleans the supply, a disconnecting device sits beside it, and valves for electrode speed, an end-of-stroke shock absorber and silencers reduce noise.

Water cools the transformer, platens, electrode holders and electrodes, and the transformer windings are coated in epoxy resin. The TE550 microprocessor unit holds the welding current constant. The synchronous SCR contactor is isolated from the cooling water circuit and protected by a thermostat. The two-stage electric pedal clamps the workpiece first, and welding starts only once the part sits correctly. An additional two-stage pedal can be connected and calls welding programme No. 2 at once.

Two-hand safety control with a timer and a removable key selector is standard on all models, and an emergency stop button is fitted. Two-hand start buttons are standard only on projection versions and are available on request for spot machines. Option 8230 supplies a water shut-off valve with a flow switch, option 8232 a rotary programme selector, and option 8234 a pneumatic double-stroke foot pedal for spot work. Option 8235 is a 1242 daN cylinder with a 125 mm diameter and a 100 mm full stroke, available on the 8201D to 09D and 8214D models. Adjustable double-stroke control is coded 8236 and 8237, low pre-squeeze force 8238 and 8239, and a proportional valve 8240. A control unit with constant energy is also available.

The 63 kVA model is chosen where projection mode and forces up to 1242 daN are needed at a moderate mains load.

Technical specifications

BrandTECNA
Country of manufactureItaly
Series8201D to 8216D
Model8201D
Typesingle-phase linear action machine
Power63 kVA
Welding typespot and projection
Short-circuit current40 kA
Thermal current6.2 kA
Secondary voltage5 V, 5.6 V, 6.3 V, 7.1 V
Max. electrode reach390 mm
Electrode force1242 daN, 736 daN
Cylinder736 daN standard; 1242 daN, 125 mm diameter, 100 mm stroke (option 8235)
Coolingwater: transformer, platens, electrode holders, electrodes
Control unitTE550, microprocessor, constant current
Options (codes)8230, 8232, 8234, 8235, 8236, 8237, 8238, 8239, 8240

Request a price and lead time

TECNA 8201D 63 kVA spot and projection welder. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What are the power and short-circuit current of the TECNA 8201D?

63 kVA, a short-circuit current of 40 kA and a thermal current of 6.2 kA, with secondary voltage steps of 5 V, 5.6 V, 6.3 V and 7.1 V.

Is a stronger cylinder available?

Yes, option 8235 gives a 1242 daN cylinder with a 125 mm diameter and a full stroke of 100 mm, and it is offered for the 8201D.

Which welding modes does the machine support?

Spot and projection. The TE550 microprocessor unit holds constant current, and programme No. 2 can be called from an additional pedal.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides