
TECNA 8003D single-phase spot and projection welder, 60 kVA, 420 mm throat
The TECNA 8003D from the 800x series is a single-phase machine rated at 60 kVA, with a 22 kA short-circuit current and a 420 mm electrode throat. Its head moves in a straight line to spot weld steel parts, and water cools the whole secondary circuit.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 8003D
- Series
- 800x
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 8003D sits in the single-phase 800x range at 60 kVA. Its short-circuit current is 22 kA and its thermal current is 5.9 kA, and the operator selects one of four secondary voltages, 5 V, 5.6 V, 6.3 V or 7.1 V. That spread lets one transformer handle both thin and thicker stacks of sheet. The electrode throat reaches 420 mm, and electrode force is either 470 daN or 79 daN. The machine is classed as a spot welder.
The head is driven by a pneumatic cylinder with a chrome-plated rod, built for heavy duty and long service, and fitted with an adjustable anti-rotation device. The pneumatic side runs without lubrication, so the shop floor stays free of oil mist. The cylinder has two strokes, switched with a key. A compressed-air filter is built in, with an air disconnect device. Valves set the speed of the electrodes, a damper cushions the end of the stroke, and silencers on the exhaust keep the noise down.
Water cools the transformer, plates, electrode holders and electrodes, and the transformer windings are coated in epoxy resin. The synchronous SCR contactor is insulated from the water circuit and carries a protective thermostat. The welding current is held by the TE550 direct current control unit. TECNA produces the 800x series in Italy.
The two-stage electric foot pedal clamps the part first and starts welding only when the part is correctly placed. The machine is prepared for a second two-stage pedal that calls programme No. 2 directly. An emergency stop switches the machine off at once. Available to order: 8030 with a valve that shuts the water off when the machine is idle and a flow switch that stops the welder if cooling water does not circulate; 8033 with a pneumatic foot in place of the key, for spot welding where the work requires it; 8037 for a proportional valve; 8042 for a rotary programme selector; 8043 for head descent without pressure.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 8003D |
| Series | 800x |
| Machine type | single-phase, linear action head |
| Welding type | spot |
| Power | 60 kVA |
| Secondary voltage | 5 V, 5.6 V, 6.3 V, 7.1 V |
| Short-circuit current | 22 kA |
| Thermal current | 5.9 kA |
| Maximum electrode throat depth | 420 mm |
| Electrode force | 470 daN, 79 daN |
| Control unit | TE550, direct current |
| Contactor | synchronous SCR with thermostat |
| Cooling | water: transformer, plates, electrode holders, electrodes |
| Options | 8030, 8033, 8037, 8042, 8043 |
Request a price and lead time
TECNA 8003D single-phase spot and projection welder, 60 kVA, 420 mm throat. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What secondary voltages does the TECNA 8003D have?
Four settings, 5 V, 5.6 V, 6.3 V and 7.1 V, at 60 kVA and a 22 kA short-circuit current.
Can a second welding programme be called directly?
Yes. The machine is prepared for a second two-stage pedal that calls programme No. 2 directly, and option 8042 adds a rotary programme selector.
What happens if the cooling water fails?
With option 8030 a flow switch stops the machine when water stops circulating, and a valve shuts off the supply when the machine is switched off.
Similar equipment from other manufacturers






