International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 7911 pneumatic spot welding gun, 2.5 kVA

The TECNA 7911 is a lightweight pneumatic gun for resistance spot welding in body repair, maintenance and pre-assembly work in industry. It has a synchronous SCR timer and regulates current by phase shift.

Brand
TECNA
Country
Italy
Model
7911
Type
portable pneumatic spot welding gun

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 7911 sits at the light end of the portable pneumatic gun range. Its transformer is rated at 2.5 kVA with a secondary voltage of 2.5 V, and the maker gives electrode forces of 40, 52, 70 and 125 daN. Light and proven in service, the gun is used for body repair, general repair work and pre-assembly on the shop floor. The manufacturer is the Italian company TECNA.

Inside sits a synchronous electronic timer built on SCR thyristors, adjustable from 2 to 65 cycles. The compensation circuit starts the count only once current of the correct size is flowing through the joint. That matters on oxidised sheet, painted surfaces and bare steel, where contact is unstable at first.

Current is regulated by phase shift, which allows difficult joints such as very thin sheet, small-diameter bars and stainless steel and similar materials. A differential pressure switch enables the timer only after the electrodes have clamped the stack with the right force.

Extension arms are available to order, namely 7401, 7402, 7403, 7404, 7405, 7406 and 7407, which widen the opening between the arms so the gun can reach a point deep inside a part. The transformer uses class F insulation that does not dry out or turn brittle with time, and it is tested at 4000 V. Compared with the heavier models in the 7911 line, this gun is simpler and lighter, which suits moderate duty cycles and frequent moves between workstations. The timer, compensation and pressure switch arrangement matches the other portable TECNA guns, so an operator familiar with the range needs no retraining.

Technical specifications

BrandTECNA
CountryItaly
Model7911
Typeportable pneumatic spot welding gun
Power2.5 kVA, 20.5 kVA
Secondary voltage2.5 V
Electrode force125 daN, 40 daN, 52 daN, 70 daN
Timersynchronous electronic, SCR, from 2 to 65 cycles
Current controlphase shift
Transformer insulationclass F, 4000 V test
Arms (to order)7401, 7402, 7403, 7404, 7405, 7406, 7407

Request a price and lead time

TECNA 7911 pneumatic spot welding gun, 2.5 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which jobs suit the TECNA 7911?

Body repair, maintenance and pre-assembly in industry. Phase-shift control suits thin sheet, small-diameter bars and stainless steel.

Which arms fit the 7911 gun?

Arms 7401, 7402, 7403, 7404, 7405, 7406 and 7407, supplied to order. Extension arms widen the opening.

Will the gun weld if the electrode force is too low?

No. The differential pressure switch enables the timer only at the correct electrode force.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides