International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 71426 three-phase transformer for resistance welding, 160 kVA

TECNA 71426 is a 160 kVA three-phase transformer for resistance welding machines, with direct current on the secondary side. It loads all three mains phases evenly, is liquid cooled and has epoxy resin cast windings. It is made in Italy to ISO 5826, ISO 10656 and ISO 22829.

Brand
TECNA
Country of manufacture
Italy
Model code
71426
Type
three-phase transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 71426 belongs to TECNA's three-phase line, where transformers work with direct current. At 160 kVA it sits at the start of a range that reaches 1500 kVA. It is used in press machines for spot and projection welding, where a single-phase machine of the same power would put too much imbalance on the workshop mains.

In a three-phase circuit the transformer draws from all three phases, so the load is shared evenly, and after rectification the secondary circuit receives direct current. For the plant this means lower peak current in any single phase and fewer supply problems for neighbouring equipment. For welding, direct current gives even heating without passing through zero, which helps on projections, on galvanised steel and where the secondary circuit of the machine is long.

Like the rest of TECNA's transformers, the 71426 is liquid cooled and has epoxy resin cast windings. On site it is connected to the cooling circuit of the machine, and the flow is checked to be sufficient for long serial cycles. The casting protects the unit from moisture, dust and vibration. The manufacturer states compliance with ISO 5826, ISO 10656 and ISO 22829.

TECNA produces transformers entirely in Italy and has worked with transformers for resistance welding machines for more than 40 years. Raw materials are bought only from selected certified suppliers. Alongside the three-phase line the range includes single-phase AC transformers up to 400 kVA and inverter transformers up to 664 kVA, as well as special versions for heating and upsetting.

To order the 71426, data on the mains voltage, the secondary voltage required, the control unit and the mounting in the machine are needed. TECNA produces transformers with different primary and secondary voltages and confirms the version against the model code.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model code71426
Typethree-phase transformer for resistance welding
Power160 kVA
Technologythree-phase, direct current
Coolingliquid
Winding insulationcast in epoxy resin
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding machines, heating, upsetting

Request a price and lead time

TECNA 71426 three-phase transformer for resistance welding, 160 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How does the 71426 differ from a single-phase transformer?

It loads all three mains phases evenly and gives direct current on the secondary side, whereas a single-phase transformer works on alternating current.

Where does the 71426 stand in the three-phase line?

The model is rated at 160 kVA and sits at the start of a line that reaches 1500 kVA.

What cooling does the 71426 need?

Liquid cooling: the transformer is connected to the machine's cooling circuit. The windings are epoxy resin cast.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides