International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 6184 inverter projection and spot welding machine, 160 kVA, 1200 daN

The TECNA 6184 is a medium power projection welding machine rated at 160 kVA, with a force of up to 1200 daN and Sensum control. It is aimed at series welding of fixings and projection assemblies on automatic lines.

Brand
TECNA
Country of manufacture
Italy
Type
Inverter machine for projection and spot welding
Welding type
Projection

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 6184 is a mid-power projection welding machine with raised clamping force. It is rated at 160 kVA with a 12.3 V secondary voltage, an 8.8 kA thermal current and a 40 kA short-circuit current, and it delivers up to 1200 daN of welding force.

Its main job is series welding of fixings with projections, such as nuts, studs, bolts, clips and brackets, onto sheet and pressed parts. A fixing has several projections, and all of them must collapse evenly so the part does not distort and the thread stays clean. A force of up to 1200 daN compresses the joint firmly before the current is applied.

The 40 kA current on closed electrodes and the 8.8 kA thermal current determine which projections are welded in a single pulse and the rate the machine can keep without overheating. For large runs the thermal current is what limits the number of welds per hour.

The 12.3 V secondary voltage leaves a margin for tooling with a longer secondary loop, for example when the part is large and the welding zone is set further back.

The source is inverter based. Programmes for each fixing or part type are stored in the TECNA Sensum control system and switched during changeovers. Weld quality on fixings is checked by pull-off or torque tests, so the programme is tuned on trial parts; samples of fixings and sheet are supplied to the maker, and the parameters are then fixed in the machine programme. The machine belongs to the TECNA robotic gun and automation range and is integrated into automatic cells with fixing feeders and robots. Selecting the kit needs the type of fixing, the sheet material and thickness, the number of welds per part and the line rate.

Technical specifications

BrandTECNA
Country of manufactureItaly
TypeInverter machine for projection and spot welding
Welding typeProjection
Control systemSensum
Power160 kVA
Secondary voltage12.3 V
Thermal current8.8 kA
Short-circuit current40 kA
Maximum welding force1200 daN

Request a price and lead time

TECNA 6184 inverter projection and spot welding machine, 160 kVA, 1200 daN. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Is the TECNA 6184 suitable for welding nuts and studs?

Yes, a force of up to 1200 daN and a short-circuit current of 40 kA are intended for projection fixings that must collapse evenly in one stroke.

What limits the production rate of the machine?

The thermal current of 8.8 kA, which sets how many welds the machine can perform over a long period without overheating.

What is the secondary voltage?

12.3 V at a power of 160 kVA.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides