
TECNA 6182 inverter projection and spot welding machine, 90 kVA, 1200 daN
The TECNA 6182 combines the lowest power in the series with a welding force of up to 1200 daN, under Sensum control. It is intended for small parts with stiff projections that need firm clamping at moderate current.
- Brand
- TECNA
- Country of manufacture
- Italy
- Type
- Inverter machine for projection and spot welding
- Welding type
- Projection
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 6182 combines the smallest rating in the series with a high welding force. The machine is rated at 90 kVA, with a 9.9 V secondary voltage, a 6.4 kA thermal current and a 32 kA short-circuit current, and its maximum welding force is 1200 daN. It is meant for small parts that need strong clamping at a moderate current.
Such a combination is useful when the projections are small in area but stiff, or when parts must be pressed tightly together to remove any gap before welding. A nut with projections welded to a small bracket is an example: the 32 kA current heats the projections, while a force of up to 1200 daN seats them evenly in one stroke.
After the current is switched off, the electrodes continue to hold the joint under pressure for a short time while the metal solidifies, which leaves a tighter joint.
The thermal current of 6.4 kA defines the continuous duty without overheating, so the line rate for large series should be matched to this value.
Lower power means a lighter load on the workshop supply, but a force this high requires rigid tooling that does not deflect under load and holds the part in position. The source is inverter based, and programmes for different parts are configured and stored in the Sensum control system from TECNA. The model belongs to the TECNA robotic gun and automation range and is designed for automatic cells. Selecting the regime requires the part drawing, the material, the thickness and the number of projections.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Type | Inverter machine for projection and spot welding |
| Welding type | Projection |
| Control system | Sensum |
| Power | 90 kVA |
| Secondary voltage | 9.9 V |
| Thermal current | 6.4 kA |
| Short-circuit current | 32 kA |
| Maximum welding force | 1200 daN |
Request a price and lead time
TECNA 6182 inverter projection and spot welding machine, 90 kVA, 1200 daN. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Why does a 90 kVA machine need 1200 daN of force?
For small parts with stiff projections, which must be pressed tightly and seated evenly at a moderate current.
What are the electrical parameters of the TECNA 6182?
A secondary voltage of 9.9 V, a thermal current of 6.4 kA and a short-circuit current of 32 kA.
What kind of tooling does it need?
Rigid tooling rated for a force of up to 1200 daN, so that the part does not shift while the projections collapse.
Similar equipment from other manufacturers






