International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 6181 inverter spot and projection welding machine, 90 kVA, 1200 daN

The TECNA 6181 is an inverter spot and projection welding machine rated at 90 kVA, with a maximum weld force of 1200 daN and Sensum control. It suits automated welding of small brackets and minor assemblies where moderate current must be paired with firm clamping.

Brand
TECNA
Country of manufacture
Italy
Type
Inverter spot and projection welding machine
Welding type
Projection

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 6181 sits at the entry level of the TECNA projection welding range. It is rated at 90 kVA, with a secondary voltage of 9.9 V, a thermal current of 6.4 kA, a short-circuit current of 32 kA and a maximum weld force of 1200 daN. The machine is therefore built around firm clamping rather than peak current.

In a typical cell, a robot or feeder places the part, the electrodes close on the joint, the control unit delivers a current pulse, and the assembly is then removed. Repeated across a batch, this sequence gives steady seating of the projections and consistent geometry, which matters most when small fasteners and minor sub-assemblies are welded in quantity.

Compared with versions that offer a lower force, this model handles parts with several raised points or parts that seat only under heavy pressure. The short-circuit rating of 32 kA leaves a margin for brief current peaks, while the thermal current of 6.4 kA indicates the rate the machine can sustain over a long run, which should be considered when a line is loaded heavily.

Control comes from the Sensum system by TECNA, where the cycle stages are set and stored programmes can be switched between part types without manual re-setting. The inverter supply delivers rectified current, which allows precise dosing of energy even for small projections. Tooling for forces up to 1200 daN is built rigid. The machine comes from an Italian producer with a portfolio of robotic guns and automation equipment. To select a configuration, the team needs part drawings, the material, the sheet thickness, the number of projections and the planned output rate.

Technical specifications

BrandTECNA
Country of manufactureItaly
TypeInverter spot and projection welding machine
Welding typeProjection
Control systemSensum
Power90 kVA
Secondary voltage9.9 V
Thermal current6.4 kA
Short-circuit current32 kA
Max. weld force1200 daN

Request a price and lead time

TECNA 6181 inverter spot and projection welding machine, 90 kVA, 1200 daN. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What work is the TECNA 6181 suited to?

Automated welding of small brackets and minor assemblies, where moderate current and clamping forces up to 1200 daN are needed.

What currents does the machine deliver?

A thermal current of 6.4 kA and a short-circuit current of 32 kA, at a power of 90 kVA and a secondary voltage of 9.9 V.

How are settings changed for different parts?

Programmes are stored in the Sensum control system from TECNA and switched without manual re-setting.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides