International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 6179 inverter spot and projection welding machine, Sensum, 200 kVA

The TECNA 6179 is an inverter spot and projection welding machine with Sensum control, rated at 200 kVA with a 60 kA short-circuit current. It is intended for industrial contact welding lines and robotic cells where a robot or automatic device feeds the parts.

Brand
TECNA
Country of manufacture
Italy
Model
6179
Type
Inverter spot and projection welding machine

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 6179 occupies the top power band among neighbouring inverter machines in the TECNA range. Its figures are 200 kVA, a secondary voltage of 10.4 V, a thermal current of 13 kA and a short-circuit current of 60 kA. The welding type is listed as projection, where the joint forms on raised points pressed into one of the parts or on the edges of fastening elements.

Each figure has a practical meaning. The 200 kVA rating sets the load the machine places on the workshop supply, and the 60 kA short-circuit current marks the limit with electrodes closed, which governs how many projections can be welded in a single pulse. The thermal current of 13 kA describes continuous duty, meaning the current the machine can carry through uninterrupted operation without overheating. The secondary voltage of 10.4 V indicates how long and heavy a secondary circuit can be before the current drops noticeably.

Two values are given for the maximum weld force, 1242 daN and 736 daN. The right one depends on the particular part, its material and the thickness of the stack, so the choice is made for each application rather than assumed.

Sensum, the in-house control platform of TECNA for resistance welding, governs the machine. It suits cells where a robot or feeder brings the part to the electrodes, and in such cases the signal exchange with the line controller is agreed during the project. Before start-up, the settings should be proven on sample parts, after which the parameters are stored in the Sensum programme so that every cycle runs with the same values. To specify a configuration, the team needs a description of the part, the material, the number of projections, the required rate, the feed layout and the data on the mains supply.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model6179
TypeInverter spot and projection welding machine
Welding typeProjection
Control systemSensum
Power200 kVA
Secondary voltage10.4 V
Thermal current13 kA
Short-circuit current60 kA
Max. weld force1242 daN, 736 daN
DirectionIndustrial resistance welding systems; robotic guns and automation

Request a price and lead time

TECNA 6179 inverter spot and projection welding machine, Sensum, 200 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Which power and current ratings does the TECNA 6179 have?

A power of 200 kVA, a thermal current of 13 kA, a short-circuit current of 60 kA and a secondary voltage of 10.4 V.

What electrode force is available?

The manufacturer gives two maximum values, 1242 daN and 736 daN. The one required is confirmed against the part material and thickness.

Which control system runs the machine?

The Sensum unit, the in-house system of TECNA for resistance welding.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides