International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 6175 projection welding machine for robotic lines, 160 kVA, Sensum

The TECNA 6175 is an inverter spot and projection welding machine with Sensum control, rated at 160 kVA with a 40 kA short-circuit current and a 12.3 V secondary voltage. The manufacturer assigns it to robotic guns and automation.

Brand
TECNA
Country of manufacture
Italy
Model
6175
Type
Inverter spot and projection welding machine

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Two facts define the TECNA 6175: a power of 160 kVA with a 40 kA short-circuit current, and its place in the robotic guns and automation area. The thermal current of 8.8 kA and the secondary voltage of 12.3 V complete the picture, placing this model in the middle group of its series.

Connection planning starts with power. A 160 kVA machine draws a considerable amount of power from the mains during each pulse, so the site supply, cable cross-section and protection are calculated in advance. The thermal current of 8.8 kA shows the load the machine carries over long periods, which matters when a line runs at a dense rate with almost no pause between cycles.

In an automated cell, a robot or feeder brings the part to the electrodes, and the machine performs projection welding through raised points on the part. Sensum, the TECNA system for resistance welding, sets the modes. How the machine exchanges signals with the line controller is agreed for each project. Settings are proven on trial parts before start-up and then fixed in the Sensum programme, so every cycle runs with the same parameters.

The weld force is given as 1242 daN and 736 daN. It shapes how the projections collapse, so the force is matched to the material and the thickness of the stack. A request for the TECNA 6175 should include a description of the part, the number of projections, the desired rate, the layout of part feeding into the cell and the data on the workshop supply.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model6175
TypeInverter spot and projection welding machine
Welding typeProjection
Control systemSensum
Power160 kVA
Secondary voltage12.3 V
Thermal current8.8 kA
Short-circuit current40 kA
Max. weld force1242 daN, 736 daN
DirectionIndustrial resistance welding systems; robotic guns and automation

Request a price and lead time

TECNA 6175 projection welding machine for robotic lines, 160 kVA, Sensum. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

Is the TECNA 6175 suitable for a robotic line?

Yes, the manufacturer places the model in the robotic guns and automation area, and a robot or automatic device can feed the part.

How does the joint form in this machine?

By projection welding, where current concentrates in raised points on the part and the joint forms as they collapse. The short-circuit current is 40 kA.

What load does the machine place on the mains?

A power of 160 kVA and a thermal current of 8.8 kA. The site supply is matched to this power before installation.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides