International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 6152 linear action medium frequency spot and projection welder, 90 kVA

The TECNA 6152 is a 90 kVA medium frequency press welder with linear action, made for spot and projection welding of thin sheet, wire and small embedded parts. It gives a short circuit current of 32 kA and runs on the Sensum touch control. Compared with the larger units in the series, it is the smaller capacity choice.

Brand
TECNA
Country of manufacture
Italy
Model
6152
Type
medium frequency spot and projection welding machine, linear action

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 6152 differs from the larger machines in the series through its smaller transformer, rated at 90 kVA. Its short circuit current is 32 kA, its thermal current 6.1 kA and its secondary voltage 9.9 V. It is a medium frequency press machine for spot and projection welding of thin sheet, wire and small embedded fixings.

Operation is handled by the Sensum touch panel, where each programme is set up. A part is first held in place by pressing the initial step of the two-step electric foot switch; the weld only triggers at the second step, and only when the piece is seated properly. An extra two-step foot switch may be plugged in to jump straight to a second programme. Dual-hand control, fitted with a timer and a detachable key switch, comes standard on projection units and is an option on spot units. Because the key comes out, the mode is changed only by whoever keeps it. Emergency stop and safety module are included.

Water cooling covers the transformer, platens, electrode holders and electrodes, and a flow switch halts the machine if flow stops. Transformer windings are cast in epoxy resin. Electrode force is stated in two figures, 1242 daN and 736 daN, and which one applies depends on the joint material and the sheet thickness.

The frame, arms, brackets and cylinders are modular, so the layout can be altered for a different part. The cylinder has a chrome plated stem for demanding duty and an adjustable anti-rotation device. Its double-stroke movement is set with a key. Pneumatics need no lubrication, so there is no oil mist, and electrodes descend without pressure for set up. The compressed air filter, receiver and air disconnect sit directly on the machine.

When an older machine is replaced by a 6152, check the 32 kA short circuit current against the parts you already run. Send the drawing, material and thickness with any enquiry, so that the arms and electrodes can be matched.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model6152
Typemedium frequency spot and projection welding machine, linear action
Control systemSensum, touch interface
Power90 kVA
Short circuit current32 kA
Thermal current6.1 kA
Secondary voltage9.9 V
Electrode force1242 daN, 736 daN
Drivedouble-stroke pneumatic cylinder, lubrication free
Coolingwater: transformer, platens, electrode holders, electrodes; flow switch
Transformerwindings cast in epoxy resin
Operator controlstwo-stage electric foot pedal; provision for second pedal; two-hand control with timer and key selector

Request a price and lead time

TECNA 6152 linear action medium frequency spot and projection welder, 90 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What power and current does the TECNA 6152 have?

It has a power of 90 kVA, a short circuit current of 32 kA, a thermal current of 6.1 kA and a secondary voltage of 9.9 V.

What electrode force is available?

Two figures are stated, 1242 daN and 736 daN. The one that applies is agreed according to the joint material and the thickness of the parts.

What is needed to connect the welder?

A power supply, compressed air and a water circuit. Water cools the transformer, platens, electrode holders and electrodes, and a flow switch stops the machine when the water flow is lost.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides