International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 6101D three-phase DC projection and spot welder, 100 kVA, 385 mm throat

The TECNA 6101D is a 610xD series model with a short 385 mm electrode throat, suited to projection welding of nuts and studs and to spot welding of compact parts. It is a 100 kVA three-phase direct current machine with a 60 kA short-circuit current.

Brand
TECNA
Country of manufacture
Italy
Model
6101D
Series
610xD

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Within the 610xD range the 6101D has the shortest electrode throat, at 385 mm. Short arms flex less under load and form a compact secondary circuit, so the machine suits small components where electrode position matters. Typical work includes projection welding of nuts, studs and fixings, and spot welding of small pressed parts. The machine delivers 100 kVA with a 60 kA short-circuit current and an 11 kA thermal current. Its secondary voltage is 5.3 V or 6.1 V, and electrode force is either 1242 daN or 736 daN.

The machine runs from three phases and welds with direct current. It loads the mains evenly, keeps the power factor high and places less strain on the plant's primary supply than a single-phase machine of the same rating. Connection also costs less. Magnetic material between the arms has a limited effect on the welding current. A six-phase silicon rectifier feeds the welder, with a check on diode clamping force, and the diodes are guarded against overload, overvoltage and overheating.

The TE553 microprocessor unit regulates current through phase shifting. Its thyristor contactors are synchronous and insulated from the cooling water, with thermal protection. The pneumatic cycle is complex and begins with a soft pre-squeeze. The chrome-plated cylinder rod is built for heavy duty, the anti-rotation mechanism is adjustable, and the double stroke is switched with a key. No lubrication is needed. An air filter with receiver and an air disconnect device are fitted, and speed throttles, a stroke-end damper and silencers reduce noise. The head can be lowered without pressure for setup.

Water cools the transformers, platens, electrode holders and electrodes, and a flow switch stops the machine if water stops flowing. The two-stage foot pedal is prepared for a second pedal that calls programme No. 2, unless option 6132 is fitted. Two-hand control with a timer and key selector, an emergency stop and an automatic circuit breaker are standard. The 6101D can also be ordered with 6132 rotary programme selector, 6133 double-stroke pneumatic pedal, 6135 two-stage cylinder giving 1200 daN with a 125 mm bore and 100 mm stroke, and 6140 proportional valve.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model6101D
Series610xD
Machine typethree-phase, direct current, linear action
Welding typespot and projection
Power100 kVA
Maximum electrode throat depth385 mm
Short-circuit current60 kA
Thermal current11 kA
Secondary voltage5.3 V, 6.1 V
Electrode force1242 daN, 736 daN
Control unitTE553, phase-shift current control
Rectifiersix-phase silicon
Coolingwater, with flow switch
Options6132, 6133, 6135, 6140

Request a price and lead time

TECNA 6101D three-phase DC projection and spot welder, 100 kVA, 385 mm throat. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What kind of work suits the TECNA 6101D?

Projection welding of nuts and studs and spot welding of compact parts, where a 385 mm throat is enough.

Can the cylinder force be increased?

Option 6135 fits a two-stage cylinder of 1200 daN with a 125 mm bore and 100 mm stroke.

How is the machine protected when water is not flowing?

A flow switch stops the machine if cooling water does not circulate, and a valve shuts off the water after the machine is switched off.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides