
TECNA 6021F inverter spot welder with rocker arm, 40 kVA, 800 mm throat, 260 daN
The TECNA 6021F has the longest electrode throat in the rocker arm range of the 602xF series, at 800 mm. It is rated at 40 kVA with a 19 kA short circuit current and an electrode force of 260 daN. It is intended for large sheet parts and panels where spots sit far from the edge.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 6021F
- Series
- 602xF
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Within the rocker arm part of the 602xF series, the 6021F has the greatest electrode throat, at 800 mm. The manufacturer gives an electrode force of 260 daN for this model. The electrical figures are the same as across the range: 40 kVA, a secondary voltage of 6.1 V and a short circuit current of 19 kA. The machine is used for wide panels, cladding and housing parts where a standard reach would fall short.
A long rocker arm on a conventional AC machine increases the loop inductance, and the weld current drops at the point. Here the medium frequency inverter forms the welding current, which runs continuously and steadily, independent of the size of the welding loop. According to TECNA, the inverter technology raises weld quality, delivers accurate timing and current, and reduces costs, including installation. Weld time is set in milliseconds.
The frame is laid out with the control unit, pneumatic controls and pressure gauge placed at the top. The TE751 unit has a wide screen, and a USB port for data storage can be ordered. The operator reads the settings on screen without leaving the part, and setting up a large panel does not require walking around the machine.
Water cools the transformer, electrode holders and electrodes, and the transformer windings are coated in epoxy resin. The chrome-copper electrode holders stand up to heavy duty and long operation, and they can be installed straight or angled on the arm, depending on how the spot is approached.
The pneumatic components and cylinder need no lubrication, so the workshop air stays free of oil mist. A two-stage electric pedal clamps the part and enables welding only when the part is in the right position. A second pedal can be connected to call welding programme 2 directly, so spots with different settings on one large panel can be welded without returning to the control unit.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 6021F |
| Series | 602xF |
| Welding type | Spot welding, medium frequency (inverter) |
| Electrode drive | Pneumatic, rocker arm (Rocker arm machine) |
| Power | 40 kVA |
| Secondary voltage | 6.1 V |
| Short circuit current | 19 kA |
| Maximum electrode throat depth | 800 mm |
| Electrode force | 260 daN |
| Control unit | TE751, wide screen, USB (optional) |
| Cooling | Water: transformer, electrode holders, electrodes |
| Controls | Two-stage electric foot pedal, second pedal connection |
Request a price and lead time
TECNA 6021F inverter spot welder with rocker arm, 40 kVA, 800 mm throat, 260 daN. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the throat depth of the TECNA 6021F?
800 mm, the longest electrode throat among the rocker arm machines in the 602xF series.
What electrode force does the TECNA 6021F give?
The manufacturer specifies 260 daN, with a 40 kVA rating and a 19 kA short circuit current.
How is the second welding programme called up?
An extra pedal is connected, and it calls welding programme 2 directly on the TE751 control unit.
Similar equipment from other manufacturers






