International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 6013 pneumatic spot welder, 25 kVA, 12 kA, 700 mm throat, manual setting

The TECNA 6013 is a pneumatic medium-frequency spot welder from the 601x series, with rocker-arm drive and a simple control panel. It delivers 25 kVA, a 12 kA short-circuit current, a throat of up to 700 mm and an electrode force of 90 daN. It suits workshops that need a spot welder without complex programming.

Brand
TECNA
Country of manufacture
Italy
Model
6013
Series
601x

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 6013 belongs to the 601x series of medium-frequency machines with rocker-arm drive, operated by foot and pneumatic controls. Compared with the larger TECNA machines it has lower power and simpler controls: 25 kVA, a secondary voltage of 9.8 V, a short-circuit current of 12 kA and an electrode force of 90 daN. Its maximum electrode throat is nonetheless 700 mm, so it reaches points well away from the edge of a sheet.

The control panel is kept simple. The operator sets weld time (TIME) and current (CURRENT) by hand using potentiometers. Such a panel is quick to learn in a workshop that makes repeated points on similar parts and does not need a memory of programmes.

The transformer, arms and electrodes are water cooled, and the transformer windings carry an epoxy resin coating. The arms adjust in length, so the throat can be set for each part. Chrome-copper electrode holders suit heavy-duty, long service and mount straight or angled, and the electrode stroke is adjustable. To change the setting, turn the knob and make a trial spot.

The pneumatic side is built for calm workshop use. The cylinder runs without lubrication, so there is no oil mist. Electrode force is set with a filter-regulator and gauge. Electrode speed is governed by throttles, a damper absorbs the impact at the end of the stroke, and the exhaust air passes through silencers.

In practice the 6013 is used where a spot welder with a long throat and moderate current is needed for thin sheet metal, and where the settings should be understood without menus or programming. The operator holds the part with both hands and starts the cycle with a foot. The moderate force and current suit thin sheet, where excessive clamping would leave deep electrode marks, while the long adjustable arms leave room for bulky parts.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model6013
Series601x
Typepneumatic spot welder, medium frequency
Electrode driverocker arm, foot and pneumatic control
Power25 kVA
Secondary voltage9.8 V
Short-circuit current12 kA
Maximum electrode throat depth700 mm
Electrode force90 daN
Control unitTIME and CURRENT, set by hand with potentiometers
Coolingwater-cooled: transformer, arms, electrodes
Armsadjustable in length

Request a price and lead time

TECNA 6013 pneumatic spot welder, 25 kVA, 12 kA, 700 mm throat, manual setting. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How is the setting made on the TECNA 6013?

Weld time and current are set by hand with the TIME and CURRENT potentiometers, and the machine has no programme memory.

What electrode force does it have and how is it adjusted?

The force is 90 daN, set with a filter-regulator and gauge on the compressed-air line.

Can the throat be changed?

Yes. The arms adjust in length, and the maximum electrode throat is 700 mm.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides