International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 6010 foot-operated inverter spot welder, 25 kVA

The TECNA 6010 is a medium-frequency inverter spot welder from the 601x series, with a rocker arm and foot pedal drive. It is rated at 25 kVA, with a secondary voltage of 9.8 V, a short-circuit current of 12 kA and an electrode throat depth of 550 mm. Time and current are set by hand on potentiometers.

Brand
TECNA
Country of manufacture
Italy
Series
601x
Model
6010

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Among the foot-operated TECNA machines, the 6010 is distinguished by its medium-frequency inverter. It is rated at 25 kVA, with a secondary voltage of 9.8 V and a short-circuit current of 12 kA. The maximum electrode throat depth is 550 mm, and the electrode force is given as two values, 95 and 240 daN.

The control unit is straightforward. The operator sets the weld time and the current, labelled TIME and CURRENT, by hand using potentiometers, with no menus or programming. This suits workplaces where similar parts are welded and settings change rarely but still need to be adjusted quickly.

The electrodes are closed with a foot pedal, whose length can be adjusted to the operator. The electrode force can be set, and a micro-switch starts the welding cycle only once the set value is reached, so each point receives the same squeeze while the operator's hands remain free to hold the part. The arms can be adjusted in length, and the electrode stroke is also adjustable, which gives flexibility across different parts. The chrome-copper electrode holders are built for heavy use and long service, and they mount straight or angled.

The transformer is epoxy coated, and it, the arms and the electrodes are water-cooled. The construction is typical of TECNA foot-operated rocker arm machines: the pedal, acting through a lever, turns the upper arm around its axis and presses the electrode onto the part resting on the lower arm. No compressed air is needed for clamping, only a power supply and cooling water. The 9.8 V secondary voltage gives a voltage margin on the loop when the arms are fully extended to 550 mm.

Before a shift the operator sets the arm length, the force and the electrode stroke, and then sets the time and current on the potentiometers. The machine suits body repair and workshops where spot welding of sheet parts with simple manual control of the mode is needed. TECNA 6010 is made in Italy.

Technical specifications

BrandTECNA
Country of manufactureItaly
Series601x
Model6010
TypeMedium-frequency inverter spot welding machine with foot drive
Power25 kVA
Secondary voltage9.8 V
Short-circuit current12 kA
Maximum electrode throat depth550 mm
Electrode force240 daN, 95 daN
Welding typeSpot
Control unitTime and current set manually by potentiometers
CoolingWater: transformer, arms, electrodes
ArmsAdjustable in length
PedalAdjustable in length, cycle start by micro-switch at set force

Request a price and lead time

TECNA 6010 foot-operated inverter spot welder, 25 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

How is the welding mode set on the TECNA 6010?

The weld time and current, marked TIME and CURRENT, are set by hand on potentiometers on the control unit.

What electrode force and throat depth does it offer?

Two force values, 95 and 240 daN, with a maximum electrode throat depth of 550 mm.

Which parts are water-cooled?

The epoxy-coated transformer, the arms and the electrodes.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides