
TECNA Item 4665N pneumatic linear action spot welder, 35 kVA, 400 mm reach
TECNA Item 4665N is a single-phase pneumatic spot welder from the 466x series, rated at 35 kVA. It has a 15.5 kA short-circuit current, a 4 V or 5.4 V secondary voltage, and a 400 mm reach with a 280 mm gap between the arms.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- Item 4665N
- Type
- Single-phase pneumatic linear action spot welding machine
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
Item 4665N is the shorter-reach member of the 466x series, combining 35 kVA with a 400 mm reach and a 280 mm gap. Its short-circuit current is 15.5 kA and its thermal current is 4.5 kA. The secondary voltage switches between 4 V and 5.4 V, so one machine can be set up for both thinner and thicker sheet. The model suits small parts whose spots lie close to the edge, where a higher rating is not needed. TECNA makes it in Italy.
The stationary frame is designed with the operator in mind. The TE101 microprocessor control panel sits at the front, with welding data visible during the entire cycle, and the pneumatic regulators and compressed-air gauge are placed on top for convenient pressure setting without stooping. Fitting the optional TE550 unit adds a USB port for logging data.
Clamping and welding are triggered by a two-stage foot pedal. The first stage clamps the workpiece and the second starts welding, and the process only begins when the blank is correctly positioned. A second pedal already has a connection point and calls programme no. 2 directly, which helps when a single part receives different spot types.
The pneumatic drive is linear, with a double-stroke cylinder that has a chrome-plated rod for heavy work and manual control. The pneumatic components run without lubrication and create no oil mist, and the air inlet is guarded by a filter with a gauge. Chrome-copper electrode holders take straight and angled electrodes and are built for long service. Water cools the whole secondary circuit, including the epoxy-coated transformer, the arms, the electrodes and the holders, which allows continuous serial welding of sheet parts, brackets and small components within the 400 mm reach.
Sizing the machine comes down to three factors: the distance from the edge to the farthest spot, which must sit within the 400 mm reach; the height of the part with its fixture, which must fit the 280 mm gap; and the current needed at the spot. If the job falls within these dimensions and a 15.5 kA short-circuit current is enough, Item 4665N does the work without moving up to a larger machine.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | Item 4665N |
| Type | Single-phase pneumatic linear action spot welding machine |
| Power | 35 kVA |
| Welding type | Spot welding |
| Secondary voltage | 4 V, 5.4 V |
| Short-circuit current | 15.5 kA |
| Thermal current | 4.5 kA |
| Machine type | Linear action machine |
| Arms | 280 mm gap, 400 mm reach |
| Control unit | TECNA TE101 (USB data storage only with TE550) |
| Cooling | Water: transformer, arms, electrodes, electrode holders |
| Drive | Double-stroke pneumatic cylinder, manual control, chrome-plated rod, oil-free |
| Cycle control | Two-stage foot pedal, connection for a second pedal to call programme no. 2 |
Request a price and lead time
TECNA Item 4665N pneumatic linear action spot welder, 35 kVA, 400 mm reach. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What short-circuit current does the Item 4665N have?
It is 15.5 kA at a 35 kVA rating, with a thermal current of 4.5 kA.
Why are there two secondary voltages?
The 4 V and 5.4 V settings let one machine be set up for different sheet thicknesses.
Is lubrication needed for the pneumatics?
No. The pneumatic cylinder runs without lubrication and creates no oil mist, and the air passes through a filter with a gauge.
Similar equipment from other manufacturers






