
TECNA 4647N foot-operated spot welder, 20 kVA, 700 mm throat depth
The TECNA 4647N pairs a 20 kVA transformer from the 464x series with 700 mm arms, for spot welding thin sheet where the welds sit well in from the edge. It is foot operated, gives 90 daN electrode force and is controlled by a TECNA TE101 unit.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 4647N
- Series
- 464x
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 4647N is the 20 kVA member of the 464x family and uses the long 700 mm arms. Its secondary voltage is 4 V, the short-circuit current 12 kA and the thermal current 3.5 kA, with electrode force of 90 daN. A lower rating places lighter demands on the supply than the higher-rated versions of the series. This combination suits thin sheet where the parts are wide and the welds lie far from the edge, such as cabinet doors and walls, shelving, small enclosures, light frames and mesh.
A foot pedal swings the upper arm down, so both hands stay free to hold the work. Electrode force is adjustable, and the microswitch starts the cycle only when the force reaches the preset value, so the result does not depend on how hard the foot presses. Pedal length can be set for the operator. On thin sheet a spot overheats easily, so a steady force and a controlled cycle matter more than spare power, and the adjustable stroke lets the electrodes reach any point across a wide part.
The machine sits on a stationary, ergonomic frame. The control panel is at the front, so the welding data stays visible during the cycle, and a microprocessor TECNA TE101 unit runs the process.
Arm length can be shortened for a smaller part. Chrome-copper electrode holders take straight or angled electrodes and are built for heavy duty and long life. Electrode stroke is adjustable. The transformer has an epoxy resin coating, and the transformer, arms and electrodes are water-cooled, so the machine must be connected to a water circuit.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 4647N |
| Series | 464x |
| Machine type | swing-arm, foot-operated spot welder |
| Welding type | spot |
| Power | 20 kVA |
| Secondary voltage | 4 V |
| Short-circuit current | 12 kA |
| Thermal current | 3.5 kA |
| Maximum electrode throat depth | 700 mm |
| Electrode force | 90 daN |
| Control unit | TECNA TE101, microprocessor |
| Cooling | water: transformer, arms, electrodes |
| Electrode holders | chrome-copper, for straight and angled electrodes |
Request a price and lead time
TECNA 4647N foot-operated spot welder, 20 kVA, 700 mm throat depth. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What sheet is the TECNA 4647N intended for?
Thin sheet, where the 20 kVA transformer delivers a 12 kA short-circuit current at 90 daN electrode force.
How far from the edge can a spot be placed?
The largest electrode throat is 700 mm, and the arms can be adjusted in length to suit each part.
Which electrodes can be fitted?
The chrome-copper electrode holders take straight and angled electrodes.
Similar equipment from other manufacturers






