
TECNA 4641N foot-operated spot welder, 20 kVA, 550 mm throat depth
The TECNA 4641N is a compact rocker arm spot welder from the 464x series with a foot pedal, for resistance spot welding. It is rated at 20 kVA with a short-circuit current of 14.5 kA and an electrode force of 95 daN at a 550 mm throat depth. It suits workshops and body repair.
- Brand
- TECNA
- Country of manufacture
- Italy
- Series
- 464x
- Model
- 4641N
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 4641N sits at the bottom of the 464x power range at 20 kVA, combined with short arms that give an electrode throat depth of 550 mm. The short loop lifts the short-circuit current to 14.5 kA, whereas the long-arm model of the same rating has a lower one. The secondary voltage is 4 V, the thermal current 3.5 kA and the electrode force 95 daN.
Electrodes close when the operator presses the foot pedal, with both hands on the part. The clamping force is preset, and the micro-switch starts the welding cycle as soon as this value is reached, so each point is squeezed to the same force. The pedal length can be changed to suit the operator's position.
The stationary frame is ergonomically designed, and the TECNA TE101 microprocessor control unit is at the front, so welding parameters are visible during the cycle. The arms can be adjusted in length, so the machine is easily reset for a different part within its reach, and the electrode stroke is adjustable to avoid unnecessary movement.
The transformer is epoxy coated and water-cooled, as are the arms and electrodes. The electrode holders are chrome-copper, built for long service under heavy use, and fitted straight or angled.
Before a shift the operator sets the arm length, enters the electrode force and stroke, and chooses the welding mode on the TE101 unit. The closing action is by foot, with no pneumatic cylinder, so no compressed air line is required and the machine can be placed anywhere in the workshop with a water supply for cooling. Its parameters suit thin sheet metal where weld points sit close to the edge and a long reach is not needed, such as repair workshops, body repair and single-piece or small-batch production.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Series | 464x |
| Model | 4641N |
| Type | Rocker arm spot welding machine with foot drive |
| Power | 20 kVA |
| Secondary voltage | 4 V |
| Short-circuit current | 14.5 kA |
| Thermal current | 3.5 kA |
| Maximum electrode throat depth | 550 mm |
| Electrode force | 95 daN |
| Welding type | Spot |
| Control unit | Microprocessor TECNA TE101 |
| Cooling | Water: transformer, arms, electrodes |
| Arms | Adjustable in length |
| Pedal | Adjustable in length, cycle start by micro-switch at set force |
Request a price and lead time
TECNA 4641N foot-operated spot welder, 20 kVA, 550 mm throat depth. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What makes the TECNA 4641N stand out in the 464x series?
Its 20 kVA rating with short arms, a 550 mm throat depth and a short-circuit current of 14.5 kA.
How is the electrode force controlled?
The force is set in advance, and the cycle starts once the micro-switch registers that this value has been reached.
Are the electrodes water-cooled?
Yes, along with the transformer and the arms.
Similar equipment from other manufacturers






