International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 4040 twin spot welding module, 32 kVA, TE93 control, 50 mm throat

TECNA 4040 combines a built-in TE93 microprocessor control unit with a synchronous SCR contactor and a short 50 mm electrode throat. It is rated at 32 kVA with a 20 kA short-circuit current and makes two points per stroke. The module is used in multi-spot machines for welds close to the edge of a part.

Brand
TECNA
Country of manufacture
Italy
Series
Modular
Model
ITEM 4040

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 4040 sits between two neighbours in the Modular range. Compared with the version without a control unit it carries the TE93 microprocessor unit and a synchronous SCR contactor, and compared with the 4042 it has a shorter electrode throat of 50 mm. The result is a complete unit for welds close to the edge of a part, such as flanges and folded edges, where deep access is not needed.

Its electrical data match the other 32 kVA Twin Spot models: a 20 kA short-circuit current, a thermal current of 3.8 kA and a 5.9 V secondary voltage. The electrode force of 260×2 daN is applied to two electrode pairs, each making its own weld, so the module completes two points in one stroke. The manufacturer lists machine types as Linear Action Machine and Rocker arm machine, and electrode holders are selected from several versions to suit the part.

The built-in TE93 unit runs the welding cycle, so the module can operate as a separate station without an external controller. The synchronous SCR contactor is insulated from the cooling water circuit and carries a protection thermostat.

Cooling is water-based. The transformer is water-cooled with epoxy resin coated windings, and water also runs through the electrode holders and electrodes. The double-stage pneumatic cylinder is lubrication-free, so no oil mist reaches the work area. The unit can work alone or in a cascade with other modules, where the welding sequence runs without outside supervision. Spreading the modules across three mains phases and welding in turn gives high output with a modest draw from the mains.

Technical specifications

BrandTECNA
Country of manufactureItaly
SeriesModular
ModelITEM 4040
Welding typeTwin Spot (two points per cycle)
Power32 kVA
Short-circuit current20 kA
Thermal current3.8 kA
Secondary voltage5.9 V
Electrode force260×2 daN
Machine typeLinear Action Machine, Rocker arm machine
Maximum electrode throat depth50 mm
Control unitmicroprocessor TE93, built in
Thyristor contactorsynchronous SCR, insulated from water, with thermostat
Coolingwater: transformer, electrode holders, electrodes
Transformer windingscoated with epoxy resin
Pneumatic cylindertwo-stage, lubrication-free

Request a price and lead time

TECNA 4040 twin spot welding module, 32 kVA, TE93 control, 50 mm throat. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

When should the 4040 be chosen instead of the 4042?

Both modules include the TE93 unit and a contactor. The 4040, with its 50 mm throat depth, is for welds near the edge of a part, while the 4042 with its longer reach suits points lying deeper.

Can the 4040 run without an external controller?

Yes, the built-in TE93 unit controls the welding cycle. Several modules can also be cascaded for sequential welding without outside supervision.

What cooling does the 4040 need?

Water cooling: water runs through the transformer, electrode holders and electrodes. The thyristor contactor is insulated from this circuit and has a thermostat.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides