
TECNA 40139 inverter transformer for resistance welding, 90 kVA
TECNA 40139 is a 90 kVA inverter transformer for stationary point and projection welding machines. It delivers direct current to the secondary circuit, is liquid cooled and epoxy resin cast, and is made in Italy. It is one of two inverter models at 90 kVA in the range.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model code
- 40139
- Type
- inverter transformer for resistance welding
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 40139 is the second inverter model TECNA offers at 90 kVA. Its power matches the neighbouring position, and the difference lies in the version set by the code: voltages, terminals and mounting. The choice is therefore made by model code and by the machine the transformer will go into.
The typical home for the 40139 is the stationary machine: press-type point and projection welders, bench and floor machines for welding fasteners, and machines built into lines. The transformer stays put there, so weight does not limit the choice, and current and duty cycle come to the fore. The direct current output of the inverter system suits projection welding, where several projections must heat up together and evenly.
The unit is cast in epoxy resin and cooled with liquid. In a stationary machine the cooling circuit is usually shared by the transformer, electrodes and platens, so at start-up it is checked that the liquid flow is enough for all consumers. The casting protects the windings from moisture and workshop dust. Routine maintenance covers the hoses and connections, cleaning of the secondary contact surfaces, and a check of winding insulation resistance after a long stop. The manufacturer states compliance with ISO 5826, ISO 10656 and ISO 22829.
TECNA has been making transformers for resistance welding for more than 40 years, and produces them entirely in Italy from materials bought from selected certified suppliers. Inverter models in the range go up to 664 kVA, three-phase DC transformers up to 1500 kVA and single-phase AC transformers up to 400 kVA. Special transformers and units for heating and upsetting are also available.
Ordering the 40139, whether for a replacement or a new machine, requires data on the inverter, the control unit, the primary and secondary voltages and the mounting location. TECNA makes transformers with different primary and secondary voltages, so the version is confirmed by code. For a replacement, a photo of the nameplate and a description of the machine are needed.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model code | 40139 |
| Type | inverter transformer for resistance welding |
| Power | 90 kVA |
| Technology | inverter, direct current |
| Cooling | liquid |
| Winding insulation | cast in epoxy resin |
| Standards | ISO 5826, ISO 10656, ISO 22829 |
| Applications | resistance welding machines, heating, upsetting |
Request a price and lead time
TECNA 40139 inverter transformer for resistance welding, 90 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
Which machines is the 40139 intended for?
Stationary press-type point and projection welding machines, machines for welding fasteners and machines built into lines, all with an inverter power source.
How does the 40139 differ from the other 90 kVA model?
The power is the same. The difference lies in the version set by the code: voltages, terminals and mounting method.
Can the 40139 share a cooling circuit with the machine?
The transformer is liquid cooled, and the circuit is usually shared with the electrodes and platens. At start-up the liquid flow is checked to be sufficient for all of them.
Similar equipment from other manufacturers






