International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 39063 single-phase welding transformer 25 kVA

The TECNA 39063 is a light-class 25 kVA single-phase transformer made in Italy. It is intended for compact resistance welding machines, bench units and small parts, with liquid cooling and epoxy resin cast windings. The unit conforms to ISO 5826, ISO 10656 and ISO 22829.

Brand
TECNA
Country of manufacture
Italy
Model (code)
39063
Type
single-phase welding transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 39063 is rated at 25 kVA and belongs to the light end of TECNA's single-phase range, well below the 400 kVA top of the alternating current series. Compared with the smallest models it offers more power margin, which suits thicker sheet packs, longer arms or longer current flow times. It carries no robot prefix and is a standard single-phase alternating current transformer for stationary and benchtop machines.

Inside a small welding machine the 39063 is used on compact spot welders for thin sheet, wire and fixing parts. Short arms and a small window keep secondary losses low in such machines, so even a modest rating delivers the required current at the electrodes.

The 39063 is liquid cooled and its windings are cast in epoxy resin, with the whole assembly made in Italy. A sealed transformer tolerates the dust and spatter of a welding shop better, and the coolant keeps the windings within temperature during repeated cycles. Connecting the coolant circuit forms part of the machine installation.

The unit conforms to ISO 5826, ISO 10656 and ISO 22829. If the machine needs direct current, TECNA offers three-phase transformers up to 1500 kVA and inverter types up to 664 kVA, and special versions are built for non-standard tasks. The 39063 itself belongs to the single-phase alternating current technology.

In a single-phase contact machine, the primary winding is switched from the mains by a thyristor contactor under the control of the timer, and the low-voltage secondary with few turns delivers high current to the electrodes. Current, weld time and pauses are set on the controller. To confirm compatibility with a machine, you need the supply voltage, the secondary voltage, the method of connection to the busbars and the coolant circuit. For a replacement, the code from the nameplate and a photo of the installation site are enough.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)39063
Typesingle-phase welding transformer for resistance welding
Power25 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin cast
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding machines, heating, upsetting

Request a price and lead time

TECNA 39063 single-phase welding transformer 25 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power rating of the TECNA 39063?

The manufacturer gives the 39063 a rating of 25 kVA on a single-phase alternating current supply. TECNA confirms the primary and secondary voltages against the model code.

Does the 39063 need separate cooling?

Yes, all TECNA transformers are liquid cooled, so the machine must be connected to a coolant circuit.

What is needed to choose a replacement for the 39063?

The code from the nameplate, the mains voltage and the type of machine. Units of the same power can differ in winding voltages.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides