
TECNA 39062 single-phase welding transformer 12 kVA
The TECNA 39062 is a compact 12 kVA single-phase transformer made in Italy. It suits light spot welding machines, benchtop units and small parts, with liquid cooling and epoxy resin cast windings. It conforms to ISO 5826, ISO 10656 and ISO 22829.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (code)
- 39062
- Type
- single-phase welding transformer for resistance welding
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
At 12 kVA the 39062 sits at the bottom of TECNA's single-phase series, whose alternating current models reach up to 400 kVA. It is chosen for small spot welding machines working on thin sheet, for benchtop units and for assemblies where space inside the frame is limited. Compared with larger models it is smaller and lighter, and it draws less primary current from the mains.
In a light machine the 39062 can be built into a benchtop frame or into suspended welding tongs. The welding current is formed on the low-voltage secondary side, so the length of the arms and the cross-section of the busbars directly affect how much current reaches the electrodes. Short, solid connections give the best results.
Like every TECNA transformer, the 39062 is liquid cooled and has its windings cast in epoxy resin. Heat is removed from the secondary circuit by the coolant, so the transformer is not put into service without a connected cooling supply. The resin fixes the coils mechanically and shields them from dust, spatter and moisture.
The unit conforms to ISO 5826, ISO 10656 and ISO 22829. TECNA's three-phase direct current transformers reach up to 1500 kVA and its inverter direct current models up to 664 kVA, so the 39062 is only one part of a broad range. Special versions are built for non-standard tasks, and all units are made in Italy.
The 39062 works like any single-phase resistance welding transformer: the controller switches the primary winding through thyristors for a set time, and the low-voltage secondary delivers a high current into the arms and electrodes. Before ordering or replacing, give TECNA the mains voltage, the machine type and the secondary voltage needed, and a photo of the nameplate from an existing unit helps. TECNA states 12 kVA for the code and confirms the primary voltage, secondary voltage and dimensions against it.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (code) | 39062 |
| Type | single-phase welding transformer for resistance welding |
| Power | 12 kVA |
| Technology | single-phase, alternating current |
| Cooling | liquid |
| Winding insulation | epoxy resin cast |
| Standards | ISO 5826, ISO 10656, ISO 22829 |
| Applications | resistance welding machines, heating, upsetting |
Request a price and lead time
TECNA 39062 single-phase welding transformer 12 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the power rating of the TECNA 39062?
The manufacturer gives the 39062 a rating of 12 kVA on a single-phase alternating current supply. TECNA confirms the primary and secondary voltages against the model code.
Does the 39062 need separate cooling?
Yes, every TECNA transformer is liquid cooled, so the unit must be connected to a coolant circuit before use.
Which standards does the 39062 follow?
TECNA makes the 39062 to ISO 5826, ISO 10656 and ISO 22829. The windings are sealed in epoxy resin.
Similar equipment from other manufacturers






