International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 36951 single-phase welding transformer 25 kVA

The TECNA 36951 is a 25 kVA single-phase welding transformer made in Italy. It suits resistance welding machines working on thin sheet and small parts, and it also serves heating and upsetting tasks. Liquid cooling and epoxy resin cast windings are standard, and the unit conforms to ISO 5826, ISO 10656 and ISO 22829.

Brand
TECNA
Country of manufacture
Italy
Model (code)
36951
Type
single-phase welding transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 36951 from TECNA is a 25 kVA unit from the smaller end of the single-phase line. It makes sense where thin metal is welded in short pulses and the machine runs from an ordinary single supply rather than a dedicated substation. The current is alternating, the circuit is single-phase, and the windings are sealed in resin.

Units of 25 kVA usually serve tabletop welders, machines with swinging arms and compact spot welding stations. The 36951 handles thin-gauge spot welding, small brackets, wire mesh, and parts for housings and domestic appliances. TECNA also applies this kind of transformer to heating and upsetting of small blanks.

Construction follows the TECNA pattern: a liquid cooled body with epoxy resin around the coils. The coolant draws heat off the windings during repeated welding cycles, while the resin keeps out damp air, dust and splashes from the shop floor. The unit should not be energised until the coolant loop has been connected and checked.

The 36951 belongs to TECNA's standard programme, which the maker extends with special units for particular tasks, including heating and upsetting. Its conformity to ISO 5826, ISO 10656 and ISO 22829 applies across the whole line. Every unit is manufactured in Italy, where the company has over 40 years of experience in welding transformers.

To match a 36951 to a machine, gather the mains voltage and frequency, the secondary voltage required, the welding type and the coolant connection arrangement. The manufacturer lists 25 kVA for the code, and TECNA confirms the remaining parameters. Monitor coolant flow and outlet temperature, check insulation at the primary terminals and clean the secondary contact faces, since oxidised or loose joints raise resistance and make the transformer run hotter.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)36951
Typesingle-phase welding transformer for resistance welding
Power25 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin cast
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding of thin sheet and small parts, heating, upsetting

Request a price and lead time

TECNA 36951 single-phase welding transformer 25 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the rating of the TECNA 36951?

The 36951 is rated at 25 kVA on a single-phase alternating current supply. TECNA confirms the primary and secondary voltages against the code.

Does the 36951 need separate cooling?

Yes, all TECNA transformers are liquid cooled, so the machine must be connected to a coolant circuit.

Which machines suit a 25 kVA transformer?

The 36951 is fitted to spot welding machines for thin sheet and small parts. TECNA also uses this type of transformer for heating and upsetting.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides