International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 36950 single-phase welding transformer 20 kVA

The TECNA 36950 is a 20 kVA single-phase transformer made in Italy for spot and projection welding machines. It operates on alternating current, uses liquid cooling and has epoxy resin cast windings. The unit is built to ISO 5826, ISO 10656 and ISO 22829.

Brand
TECNA
Country of manufacture
Italy
Model (code)
36950
Type
single-phase welding transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Within the single-phase series, the 36950 is the smaller choice at 20 kVA. It suits compact welding machines where the secondary circuit needs moderate current and the workshop supply cannot take large peak loads. Like the rest of the single-phase range, it draws alternating current through a single-phase circuit.

A transformer of this size tends to live in small bench and portable welders, rocker arm machines and modest spot welding stations. Typical work covers spot welds on thin steel, small brackets, mesh and wire, and parts for household appliances and enclosures. TECNA also applies transformers of this class to heating and upsetting of small blanks.

The 36950 is built the same way as the other TECNA transformers, with a liquid cooled body and an epoxy resin cast assembly. The resin guards the windings against moisture, dust and splashes, and the coolant keeps temperatures steady through frequent welding cycles. The machine should not be run until the coolant circuit is connected and checked.

TECNA's standard single-phase alternating current range runs up to 400 kVA, its three-phase direct current range up to 1500 kVA, and its inverter direct current range up to 664 kVA. The 36950 meets ISO 5826, ISO 10656 and ISO 22829, and the company also manufactures special transformers for unusual applications. Everything is made in Italy.

The model code is a good starting point, but accurate selection needs the mains voltage, the secondary voltage, the machine type and the cooling arrangement. TECNA confirms the remaining parameters from its technical data sheet for the code. When replacing an older unit, send a photo of its nameplate so the fit can be checked. During planned maintenance, clean the coolant channels and inspect the hoses and secondary bus bolts, because blocked channels and loose bolts are the usual cause of overheating.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)36950
Typesingle-phase welding transformer for resistance welding
Power20 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin cast
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding of thin sheet, heating, upsetting

Request a price and lead time

TECNA 36950 single-phase welding transformer 20 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power rating of the TECNA 36950?

The manufacturer lists 20 kVA for the 36950 on a single-phase alternating current supply. TECNA confirms the primary and secondary voltages against the model code.

Which standards does the TECNA 36950 meet?

TECNA builds its transformers to ISO 5826, ISO 10656 and ISO 22829. The windings are cast in epoxy resin.

Can the 36950 replace an old transformer?

It can, provided the 20 kVA rating, the secondary voltage and the mounting dimensions match. A photo of the old nameplate lets the fit be checked.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides