International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 3670E-Tech E-Tech spot welding system for end-of-line plants, 25 kVA

The TECNA 3670E-Tech is an E-Tech spot welding system for the end sections of production lines and for body repair. It is rated at 25 kVA, with a thermal current of 1.25 kA and a secondary voltage of 14.2 V, and is run by the TE760 control unit with a medium frequency inverter.

Brand
TECNA
Country of manufacture
Italy
Series
E-Tech
Type
resistance spot welding system

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 3670E-Tech belongs to the E-Tech pair and has the higher secondary voltage, 14.2 V, at 25 kVA with a thermal current of 1.25 kA. That extra voltage gives more margin to drive current through a long secondary circuit with cables and guns. The E-Tech series is made for the end sections of production lines, where welds are finished, corrected and completed after the main process. The machine works in body repair as well as in industrial production with high output.

The gun is a C-type unit with full water cooling, giving 450daN at 8 bar. It connects to the machine by two extra flexible water-cooled cables, each 2400 mm long. The cooling system sits on board the machine, so no separate chiller is needed. The machine carries a suspension arm and balancer for hanging the guns, and communication runs through a USB port.

The process is run by a TE760 control unit of industrial design. Programming is simple, with nine keys and a backlit graphic display. The unit uses an IGBT medium frequency inverter and holds 150 welding programmes, four of which can be called from outside, each with up to 15 parameters. Current upslope and downslope, pulses, and pre and post welding functions are available, and time is set with 1 ms resolution.

The display shows the RMS welding current and the machine load percentage. Two modes are available, current stabilisation and FIX, with limits set for welding current and inverter use. A stepper function compensates for electrode wear along programmed curves. Single and automatic cycles are available, along with WELD and NON WELD functions, and the unit adjusts itself automatically to 50/60 Hz mains. Menus run in Italian, English, French, German, Spanish, Swedish and Portuguese. The firmware can be updated, programmes can be linked in sequence, and welding mode tables can be viewed on screen.

Technical specifications

BrandTECNA
Country of manufactureItaly
SeriesE-Tech
Typeresistance spot welding system
Power25 kVA
Thermal current1.25 kA
Secondary voltage14.2 V
GunsC-type, water cooled, 450daN at 8 bar
Gun cables2 pcs, water cooled, 2400 mm
Control unitTE760, IGBT medium frequency inverter
Programme memory150, of which 4 can be called externally
Parameters per programmeup to 15
Time resolution1 ms
Mains frequency50/60 Hz, self-adjusting
InterfaceUSB

Request a price and lead time

TECNA 3670E-Tech E-Tech spot welding system for end-of-line plants, 25 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the secondary voltage of the TECNA 3670E-Tech?

The secondary voltage is 14.2 V at 25 kVA, with a thermal current of 1.25 kA.

What force do the guns deliver?

The C-type water cooled guns give 450daN at a pressure of 8 bar.

Is a separate chiller needed?

No, the water cooling system is built into the machine, and it also cools the guns and the two 2400 mm cables.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides