
TECNA 3660E-Tech E-Tech end-of-line spot welding system, 25 kVA, 13.3 V
The TECNA 3660E-Tech is an E-Tech spot welding system for the end sections of production lines and for body repair. It is rated at 25 kVA with a thermal current of 1.25 kA and a secondary voltage of 13.3 V, and is run by the TE760 control unit.
- Brand
- TECNA
- Country of manufacture
- Italy
- Series
- E-Tech
- Type
- resistance spot welding system
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 3660E-Tech has a secondary voltage of 13.3 V, which is lower than the voltage of its partner model in the E-Tech pair. Both models share the same 25 kVA rating and 1.25 kA thermal current, so the difference lies in the secondary voltage, which is matched to the length and resistance of the secondary circuit. TECNA built the E-Tech systems for the end sections of lines, where welds are finished and corrected after the main process.
The TE760 control unit gives the machine its use in body repair as well as in industrial sections with high part throughput. Programming is done on an industrial design unit with nine keys and a backlit graphic display. It uses an IGBT medium frequency inverter and stores 150 welding programmes, four of which can be called from outside, with up to 15 parameters in each programme. Current ramps, pulses and pre and post welding functions are available, and time is set in steps of 1 ms.
The display reports the RMS welding current and the percentage load of the machine. Two modes are offered, current stabilisation and FIX, and the welding current limits and the share of inverter use can be set. A stepper function offsets electrode wear along programmed curves. Single and automatic cycles are available, together with WELD and NON WELD functions, and the unit adjusts itself to 50/60 Hz mains. Menus come in seven languages, including Italian, English and Portuguese, and the firmware can be updated.
The C-type gun is fully water cooled and gives 450daN at 8 bar. It is joined to the machine by two extra flexible water-cooled cables, each 2400 mm long, and the cooling system is on board the machine, so no separate chiller is required. A suspension arm and balancer hold the guns, and communication runs through a USB port.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Series | E-Tech |
| Type | resistance spot welding system |
| Power | 25 kVA |
| Thermal current | 1.25 kA |
| Secondary voltage | 13.3 V |
| Guns | C-type, water cooled, 450daN at 8 bar |
| Gun cables | 2 pcs, water cooled, 2400 mm |
| Control unit | TE760, IGBT medium frequency inverter |
| Programme memory | 150, of which 4 can be called externally |
| Parameters per programme | up to 15 |
| Time resolution | 1 ms |
| Mains frequency | 50/60 Hz, self-adjusting |
| Interface | USB |
Request a price and lead time
TECNA 3660E-Tech E-Tech end-of-line spot welding system, 25 kVA, 13.3 V. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the secondary voltage of the TECNA 3660E-Tech?
The secondary voltage is 13.3 V at 25 kVA, with a thermal current of 1.25 kA.
What force do the guns deliver?
The C-type water cooled guns give 450daN at a pressure of 8 bar.
Is a separate chiller needed?
No, the water cooling system is built into the machine and also cools the guns and their two 2400 mm cables.
Similar equipment from other manufacturers






