International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 36598 Single-Phase Transformer for Resistance Welding, 200 kVA

The TECNA 36598 is a single-phase alternating current transformer rated at 200 kVA for resistance welding machines. It is liquid cooled and its windings are cast in epoxy resin. The unit is made in Italy and suits press-type spot and projection welding machines, heating and upsetting.

Brand
TECNA
Country of manufacture
Italy
Model (code)
36598
Type
single-phase transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 36598 is distinguished from its neighbouring single-phase models above all by its 200 kVA rating. It sits in the upper part of the single-phase range, which TECNA takes up to 400 kVA on alternating current. A transformer of this class is used in stationary machines that need a large welding current on the secondary side, such as press-type spot welding machines, projection welding and installations with several electrodes.

A unit of 200 kVA is normally installed in press-type machines with a rigid frame, where high clamping force is combined with high current. Such a machine needs its own supply line with a margin in primary current, together with a separate liquid cooling circuit.

The construction of the 36598 is typical of TECNA welding transformers: liquid cooling and an epoxy resin casting. The cast body copes better with machine vibration, moisture and workshop dust, while the liquid carries heat away from the windings and the secondary turn during continuous operation. The cooling circuit must be connected at the specified flow rate before installation.

TECNA builds its transformers to ISO 5826, ISO 10656 and ISO 22829, which apply to resistance welding equipment. Alongside single-phase alternating current models such as the 36598, the company has three-phase direct current technology up to 1500 kVA, inverter direct current units up to 664 kVA and special transformers for particular tasks.

Selecting the 36598 requires machine data: mains voltage and frequency, secondary voltage, the type of welding and the parameters of the cooling circuit. The manufacturer publishes 200 kVA for this model, and other parameters are confirmed by TECNA against the model code. When replacing a unit, a photograph of the nameplate allows the new transformer to be checked against the old one.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)36598
Typesingle-phase transformer for resistance welding
Power200 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin casting
StandardsISO 5826, ISO 10656, ISO 22829
Applicationresistance welding machines, heating, upsetting

Request a price and lead time

TECNA 36598 Single-Phase Transformer for Resistance Welding, 200 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power rating of the TECNA 36598?

The manufacturer lists 200 kVA for the 36598, a single-phase unit on alternating current. TECNA confirms the primary and secondary voltages against the model code.

Is separate cooling needed?

Yes, all TECNA transformers are liquid cooled, so the machine must be connected to a coolant circuit.

Which standards does the transformer conform to?

TECNA builds its transformers to ISO 5826, ISO 10656 and ISO 22829. The windings are cast in epoxy resin.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides