International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 3655 Evolution 2 DC spot welding station for body shop, 25 kVA, 13 kA

The TECNA 3655 Evolution 2 is a DC spot welding station for body shops, covering spot welding with a C gun, twin spot, single-sided welding, spotting and localised heating. It has a 25 kVA medium frequency inverter at 1000 Hz with a 13 kA current and a TE40i control unit.

Brand
TECNA
Country of manufacture
Italy
Series
EVOLUTION2
Model
3655 Evolution 2

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Among TECNA body shop stations, the 3655 Evolution 2 stands out for its DC inverter source: a medium frequency unit of 25 kVA at 1000 Hz with a 13 kA current, a thermal current of 1.25 kA and a secondary voltage of 16 V. The current is direct, so its level does not depend on fluctuations in the supply voltage or on the state of the secondary circuit. On galvanised sheet this gives a steadier spot, while the high current shortens welding time and extends electrode life.

The TE40i control unit holds a set of preset programmes, including ones for high-strength steels (HSS). Timing is set in milliseconds, the display shows the actual welding current, and pulses, current adjustment and automatic compensation are available. A USB port updates the software and transfers welding data to a PC. Electrode force is handled by an automatic proportional valve.

Compared with earlier TECNA stations, the EVOLUTION2 series keeps two independent programmes, water cooling and pneumatic operation, with two tools connected at once. When the operator picks up a different tool, the station recalls the matching saved programme itself, so there are fewer manual changes and fewer setting errors. Pneumatic Fast Guns deliver pressures up to 700 daN.

The typical body repair jobs in the maker's design brief include spot welding with a C gun and quick-change arms, twin spot welding, single-sided welding with or without a water-cooled gun, welding nails and washers for pulling out dents with the spotter function, and localised heating of the sheet with a carbon electrode.

The three-phase supply draws evenly, so each phase carries less current and the connection to the workshop mains is simpler. The housing has a new design, and the trolley has protected wheels, so the station stands steadily and moves well around the workshop. The unit is made in Italy by TECNA.

Technical specifications

BrandTECNA
Country of manufactureItaly
SeriesEVOLUTION2
Model3655 Evolution 2
TypeDC spot welding station, MF inverter
Power25 kVA
Inverter frequency1000 Hz
Welding current13 kA
Thermal current1.25 kA
Secondary voltage16 V
Fast Guns forceup to 700 daN
Control unitTE40i
Coolingwater
InterfaceUSB

Part numbers

Show all part numbers (1)

3655 Evolution 2

Request a price and lead time

TECNA 3655 Evolution 2 DC spot welding station for body shop, 25 kVA, 13 kA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What jobs can the TECNA 3655 Evolution 2 do?

Spot welding with a C gun, twin spot welding, single-sided welding, spotting with nails and washers for straightening, and localised heating with a carbon electrode.

Can the station weld high-strength steel?

Yes. The TE40i unit has preset programmes for HSS, timing is set in milliseconds, and automatic compensation is included.

What supply does the station need?

A three-phase supply, with the draw spread evenly across the three phases, and a 25 kVA medium frequency inverter.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides