International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 3650ECF20 inverter semi-automatic spot welder for car body repair, 25 kVA

The TECNA 3650ECF20 is an inverter semi-automatic spot welder from the Traditional Inverter Semi-Automatic range for car body repair. It is rated at 25 kVA, with a secondary voltage of 15 V and a thermal current of 1.25 kA. It suits body bays that work on body panels.

Brand
TECNA
Country of manufacture
Italy
Model
3650ECF20
Series
Traditional Inverter Semi-Automatic

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 3650ECF20 is in the Traditional Inverter Semi-Automatic group of TECNA's car body repair machines. Unlike the single phase units in the same range, the welding current here is formed by an inverter. The manufacturer gives a power of 25 kVA, a secondary voltage of 15 V and a thermal current of 1.25 kA.

The 25 kVA rating sets the load on the mains, so the workshop supply is prepared for it. The 15 V secondary voltage feeds the welding circuit and drives current through the arms, cables and electrodes. The thermal current of 1.25 kA is the current held in continuous running without overheating, which matters when spots are made one after another.

In body repair the machine restores factory resistance spots when outer panels, sills, arches and reinforcements are replaced, and when repair inserts are welded in. A resistance spot needs no filler wire, its heat-affected zone is small, and thin body sheet distorts less than it would under arc welding.

The inverter circuit delivers a steady current, so the operating conditions depend less on the length and shape of the welding loop. For a body technician this means the same quality of spot at different arm positions and in different places on the body.

The gun design, arm set, cooling, control unit and equipment supplied are not described on the 3650ECF20 page. These details are clarified on enquiry, together with the work involved and the types of vehicle the workshop repairs, so the machine is set up for the actual tasks of the bay.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model3650ECF20
SeriesTraditional Inverter Semi-Automatic
TypeInverter semi-automatic spot welder
SectionCar body repair spot welders
Power25 kVA
Secondary voltage15 V
Thermal current1.25 kA

Request a price and lead time

TECNA 3650ECF20 inverter semi-automatic spot welder for car body repair, 25 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power of the TECNA 3650ECF20?

25 kVA at a secondary voltage of 15 V, and the workshop supply is prepared for this load.

What current can the machine hold in continuous use?

A thermal current of 1.25 kA, which is the figure to check for a run of spots made one after another.

How does it differ from the single phase TECNA body repair machines?

The welding current is formed by an inverter rather than a conventional mains AC transformer, and on the listed figures the machine is more powerful.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides