International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 33415 Single-Phase Welding Transformer, 250 kVA

TECNA 33415 is a 250 kVA single-phase alternating current transformer for resistance welding machines. Its windings are liquid cooled and cast in epoxy resin. The unit conforms to ISO 5826, ISO 10656 and ISO 22829 and is produced in Italy.

Brand
TECNA
Country of manufacture
Italy
Model
33415
Type
single-phase welding transformer

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 33415 is the upper half of TECNA's single-phase line, which ends at 400 kVA. This welding transformer is rated at 250 kVA, operates on alternating current, and is intended for fitting into resistance welding machines. Because the same power rating appears on other TECNA models with different codes, the designation 33415 must accompany the 250 kVA figure whenever a unit is specified.

Heat from the windings is carried off by a liquid circuit, and the windings themselves are cast in epoxy resin. TECNA uses both methods on all of its welding transformers. The liquid takes heat away from the active part during repeated welding impulses, while the resin insulates the windings and protects them from moisture, dust and machine vibration.

The manufacturer declares that the 33415 conforms to ISO 5826, ISO 10656 and ISO 22829, standards that govern transformers for resistance welding. Those references, along with the model and the 250 kVA rating, are a useful addition to any technical brief for a new machine or a replacement unit.

TECNA has been producing resistance welding transformers for over 40 years, all of them in Italy. Single-phase alternating current technology, to which the 33415 belongs, extends up to 400 kVA. For more demanding applications the company supplies three-phase direct current transformers up to 1500 kVA and inverter direct current units up to 664 kVA, along with special assemblies for heating and upsetting.

A request for this unit should state the mains voltage and the required secondary voltage, because TECNA can supply transformers in several primary and secondary voltage combinations. Raw materials are sourced only from certified suppliers that the company works with on an ongoing basis.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model33415
Typesingle-phase welding transformer
Current typealternating current
Power (kVA)250 kVA
Coolingliquid
Winding insulationcast epoxy resin
StandardsISO 5826, ISO 10656, ISO 22829
Applicationresistance welding machines

Request a price and lead time

TECNA 33415 Single-Phase Welding Transformer, 250 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the rated power of the TECNA 33415?

The rated power is 250 kVA. It is a single-phase unit for alternating current, in a line that extends up to 400 kVA.

Which cooling method does the 33415 use?

It is liquid cooled, so it is connected to the cooling circuit of the machine, and its windings are encapsulated in cast epoxy resin.

Which standards is the transformer produced to?

TECNA builds the 33415 to ISO 5826, ISO 10656 and ISO 22829 for resistance welding equipment.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides