
TECNA 33413 Single-Phase Welding Transformer, 100 kVA
The TECNA 33413 is a 100 kVA single-phase transformer for alternating current resistance welding machines. Its windings are liquid cooled and the unit is encapsulated in cast epoxy resin. It meets ISO 5826, ISO 10656 and ISO 22829 and is made in Italy.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 33413
- Type
- single-phase welding transformer
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 33413 is a single-phase welding transformer for alternating current with a rating of 100 kVA, made for installation in resistance welding machines. In TECNA's single-phase range it occupies a middle position, below the 400 kVA upper limit. Other TECNA transformers are also rated 100 kVA under different codes, so the 33413 model number matters more than the power figure when specifying a unit.
The windings are liquid cooled and the whole assembly is encapsulated in cast epoxy resin. TECNA uses this arrangement on all of its welding transformers. The liquid draws heat out of the active part during successive welding pulses, while the resin guards the windings against moisture, dust and machine vibration.
The manufacturer states that the 33413 meets ISO 5826, ISO 10656 and ISO 22829, which cover transformers used in resistance welding. Including these standards in a technical brief, along with the model and the 100 kVA rating, is useful when the unit is ordered for a new machine or as a replacement.
TECNA has produced transformers for resistance welding for more than 40 years, and every unit is manufactured in Italy. Single-phase alternating current technology, to which the 33413 belongs, extends to 400 kVA. For heavier duties the range includes three-phase direct current transformers up to 1500 kVA and inverter direct current units up to 664 kVA, as well as special assemblies for heating and upsetting.
A typical enquiry for a unit of this size gives the model code, the type of machine, the mains voltage and the requirements for the cooling circuit, along with the required secondary voltage, since TECNA produces several combinations of primary and secondary voltage. Raw materials come only from certified suppliers that the company works with on an ongoing basis.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 33413 |
| Type | single-phase welding transformer |
| Current type | alternating current |
| Power (kVA) | 100 kVA |
| Cooling | liquid |
| Winding insulation | cast epoxy resin |
| Standards | ISO 5826, ISO 10656, ISO 22829 |
| Application | resistance welding machines |
Request a price and lead time
TECNA 33413 Single-Phase Welding Transformer, 100 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the power rating of the TECNA 33413?
The rated power is 100 kVA. The unit is single-phase and works on alternating current, and the TECNA single-phase line extends up to 400 kVA.
What cooling does the 33413 require?
It is liquid cooled and connects to the cooling circuit of the machine. Its windings are encapsulated in cast epoxy resin.
Which standards is the model built to?
TECNA builds the 33413 to ISO 5826, ISO 10656 and ISO 22829 for resistance welding equipment.
Similar equipment from other manufacturers






