
TECNA 33410 single-phase welding transformer, 30 kVA
The TECNA 33410 is a 30 kVA single-phase transformer for light resistance welding equipment. It is liquid cooled, has epoxy resin encapsulated windings and is manufactured in Italy. It suits bench-top units, suspended tongs and small stationary machines for thin sheet, wire and small parts.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (code)
- 33410
- Type
- single-phase transformer for resistance welding
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 33410 is one of the lower-rated single-phase models in the range, with an output of 30 kVA. It is intended for light spot welding equipment, such as bench-top units, suspended tongs and small stationary machines used on thin sheet, wire and small components. Its compact size makes the transformer easier to fit inside a machine housing or into the tongs themselves.
In a light machine the transformer is chosen when size and weight matter most, since it is built into the body of a bench unit or into suspended tongs. The welding current is formed on the low-voltage secondary circuit, so the length of the arms and the cross-section of the busbars directly determine how much of that current reaches the electrodes.
Like every TECNA transformer, the 33410 is liquid cooled, and its windings are encapsulated in epoxy resin. It should not be run without a connected cooling supply, because the liquid removes heat from the secondary circuit. The resin filling shields the windings from dust, spatter and moisture, and holds them firmly in place.
The transformer meets ISO 5826, ISO 10656 and ISO 22829. The single-phase alternating current range from TECNA ends at 400 kVA, above which the three-phase direct current transformers reach 1500 kVA, and the inverter direct current units go up to 664 kVA.
In operation, the control unit switches the primary winding on through thyristors for a set time, and high current at low voltage appears on the secondary side, which is tied by busbars to the arms and electrodes. How much of the transformer's rating reaches the weld point depends on the busbar cross-section, the arm length and the window area. The manufacturer publishes only the 30 kVA rating for the 33410, so an enquiry to TECNA should include the mains voltage, the type of machine and, for a replacement, the data from the old unit's nameplate. The primary and secondary voltages, dimensions and weight are then confirmed from the model code.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (code) | 33410 |
| Type | single-phase transformer for resistance welding |
| Power | 30 kVA |
| Technology | single-phase, alternating current |
| Cooling | liquid |
| Winding insulation | epoxy resin encapsulation |
| Standards | ISO 5826, ISO 10656, ISO 22829 |
| Applications | resistance welding machines, heating, upsetting |
Request a price and lead time
TECNA 33410 single-phase welding transformer, 30 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the rating of the TECNA 33410 transformer?
The manufacturer gives 30 kVA for model 33410, and the technology is single-phase on alternating current. TECNA confirms the primary and secondary voltages from the model code.
Does it need separate cooling?
Yes, all TECNA transformers are liquid cooled, so the machine has to be connected to a coolant circuit.
What is needed to select a replacement?
The code 33410 from the nameplate, the mains voltage and the type of machine. Models of the same rating can differ in their winding voltages.
Similar equipment from other manufacturers






