International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 33235 single-phase welding transformer, 40 kVA

The TECNA 33235 is a 40 kVA single-phase transformer for resistance welding machines. It is liquid cooled, has epoxy resin encapsulated windings and is made entirely in Italy. It suits suspended tongs and small spot welding machines where a longer weld point or coated sheet is involved.

Brand
TECNA
Country of manufacture
Italy
Model (code)
33235
Type
single-phase transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 33235 is rated at 40 kVA and sits at the light end of the single-phase range, with a small margin over the smallest models. It is aimed at suspended tongs and small spot welding machines where a longer weld point, coated sheet or slightly greater arm reach is needed than the smallest transformers can comfortably cover.

For light machines a 40 kVA unit is chosen when size and mass count, and it is built into the housing of a bench machine or into suspended tongs. The welding current forms on the low-voltage secondary circuit, so the length of the arms and the cross-section of the busbars directly affect how much current reaches the electrodes.

The TECNA 33235 is liquid cooled and its housing is filled with epoxy resin. For the machine this means hooking up a cooling circuit with clean liquid at a steady pressure, while for the windings the resin gives protection against moisture, dust and vibration. The manufacturer builds its transformers entirely in Italy, using materials from selected and certified suppliers.

The transformers are made to ISO 5826, ISO 10656 and ISO 22829, which cover resistance welding equipment. Alongside single-phase alternating current models such as the 33235, the manufacturer offers three-phase direct current technology up to 1500 kVA, inverter direct current up to 664 kVA and special transformers for individual tasks.

Current in the welding loop is regulated by the control unit through phase control of the thyristors, while the transformer steps the mains voltage down to the secondary voltage and raises the current. When a machine is upgraded, the transformer, the control unit and the secondary busbars are therefore checked together. Selecting the TECNA 33235 requires the mains voltage and frequency, the secondary voltage, the type of welding and the cooling circuit parameters. The manufacturer publishes a 40 kVA rating for this model and confirms the other figures from the code, so send a photo of the nameplate with any replacement enquiry so the version can be checked.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)33235
Typesingle-phase transformer for resistance welding
Power40 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin encapsulation
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding machines, heating, upsetting

Request a price and lead time

TECNA 33235 single-phase welding transformer, 40 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the rating of the TECNA 33235 transformer?

The manufacturer gives 40 kVA for model 33235, and the technology is single-phase on alternating current. TECNA confirms the primary and secondary voltages from the model code.

Does it need separate cooling?

Yes, all TECNA transformers are liquid cooled, so the machine must be connected to a coolant circuit.

Which standards does the transformer meet?

TECNA makes its transformers to ISO 5826, ISO 10656 and ISO 22829. The windings are encapsulated in epoxy resin.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides