International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 32835 single-phase welding transformer, 150 kVA

The TECNA 32835 is a 150 kVA single-phase transformer for resistance welding machines. It is liquid cooled, has epoxy resin encapsulated windings and is manufactured in Italy. It suits stationary spot and projection machines, heating and upsetting.

Brand
TECNA
Country of manufacture
Italy
Model (code)
32835
Type
single-phase transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 32835 is a single-phase transformer rated at 150 kVA, the heavier part of the range but still below the 400 kVA upper limit of the single-phase line. That power is needed by press-type spot and projection machines with a large secondary loop, and by upsetting and heating machines where current has to flow longer than in an ordinary spot.

Machines at 150 kVA are stationary press-type units for spot and projection welding, fastener welding and heating. The primary current at this level is clearly noticeable on the workshop network, which is why the machine's power supply is designed separately.

Cooling on the 32835 is by liquid, and the windings are sealed in epoxy resin, a combination TECNA applies across its transformers. The resin copes with vibration, moisture and dust, while the liquid removes heat from the windings and the secondary turn over long production runs. Wiring the coolant loop is therefore a step of the installation.

Compliance is with ISO 5826, ISO 10656 and ISO 22829. Within TECNA's single-phase alternating current line the top rating is 400 kVA; beyond that point the company switches to three-phase direct current units up to 1500 kVA and inverter direct current units up to 664 kVA.

Fitting this unit into a machine depends on the secondary loop: busbar section, arm length and window area decide how much of the transformer's output reaches the electrodes. The manufacturer's page gives only the 150 kVA rating. Voltages, dimensions and mass are confirmed by TECNA from the code, so when you ask, state the mains voltage, the machine type and, for a replacement, the details from the old unit's plate.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)32835
Typesingle-phase transformer for resistance welding
Power150 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin encapsulation
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding machines, heating, upsetting

Request a price and lead time

TECNA 32835 single-phase welding transformer, 150 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the rating of the TECNA 32835 transformer?

The manufacturer gives 150 kVA for model 32835, and the technology is single-phase on alternating current. TECNA confirms the primary and secondary voltages from the model code.

Does it need separate cooling?

Yes, all TECNA transformers are liquid cooled, so the machine must be connected to a coolant circuit.

Which information should accompany a request?

The code 32835 from the nameplate, the mains voltage and the type of machine. Units of the same power can still have different winding voltages.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides