
TECNA 32784 single-phase welding transformer, 160 kVA
The TECNA 32784 is a 160 kVA single-phase transformer for resistance welding machines. It is liquid cooled, its windings are sealed in epoxy resin and it is made in Italy. It suits thicker sheet and projection welding, as well as heating and upsetting.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (code)
- 32784
- Type
- single-phase transformer for resistance welding
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 32784 belongs to the high-rated part of the single-phase line, at 160 kVA. Compared with the mid-range codes it delivers a much larger current on the secondary circuit and places heavier demands on the supply network. Among the single-phase alternating current designs, which TECNA builds up to 400 kVA, this model sits in the upper half of the range.
Typical installations for the 32784 are press-type spot and projection machines with a rigid frame, machines for thicker sheet and multi-point setups. A dedicated supply line with headroom on the primary current is needed. The model also suits heating and upsetting, where TECNA fits transformers to individual jobs, and the control unit is matched to the transformer's rating.
The 32784 has the same build as every TECNA transformer: liquid cooling and an epoxy resin body. The resin keeps out vibration, moisture and workshop dust, and the coolant removes heat from the windings and the secondary turn during long runs. Before start-up the coolant circuit is connected to the transformer.
TECNA transformers are produced entirely in Italy, and the company has worked on welding transformers for more than 40 years. The 32784 meets ISO 5826, ISO 10656 and ISO 22829. Alongside the single-phase models, the range includes three-phase direct current transformers up to 1500 kVA and inverter units up to 664 kVA.
Before ordering, check that the workshop network can cope with a 160 kVA machine, and collect the secondary voltage and mounting data. TECNA confirms these parameters against the model code. If the transformer is a replacement, send a photo of the nameplate and a description of the machine.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (code) | 32784 |
| Type | single-phase transformer for resistance welding |
| Power | 160 kVA |
| Technology | single-phase, alternating current |
| Cooling | liquid |
| Winding insulation | epoxy resin encapsulation |
| Standards | ISO 5826, ISO 10656, ISO 22829 |
| Applications | press-type spot and projection welding machines, heating, upsetting |
Request a price and lead time
TECNA 32784 single-phase welding transformer, 160 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the rating of the TECNA 32784 transformer?
The manufacturer gives 160 kVA for model 32784, and the technology is single-phase on alternating current. TECNA confirms the primary and secondary voltages from the model code.
Is separate cooling required for the 32784?
Yes, every TECNA transformer is liquid cooled, so the machine must be connected to a coolant circuit.
Which machines suit a 160 kVA transformer?
The 32784 is fitted to resistance welding machines for thicker sheet and projection welding. The manufacturer also uses such transformers for heating and upsetting.
Similar equipment from other manufacturers






