International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 32778 single-phase welding transformer 36 kVA

The TECNA 32778 is an Italian-built single-phase transformer rated at 36 kVA for point and projection welding machines. It is designed for thin sheet and small parts, runs on alternating current and has liquid cooling with epoxy resin cast windings. The unit conforms to ISO 5826, ISO 10656 and ISO 22829.

Brand
TECNA
Country of manufacture
Italy
Model (code)
32778
Type
single-phase welding transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

Rated at 36 kVA, the 32778 sits between the smaller and mid-range single-phase units in the TECNA line. It is a practical choice where thin metal is welded in short bursts and the machine is supplied from a single-phase circuit rather than a dedicated feeder. The output current is alternating and the windings are sealed in resin.

Installations at this rating usually sit in small fixtures and bench-type spot welders. Typical jobs for the 32778 include tacking thin steel, joining brackets, mesh and wire, and building housings for household equipment. TECNA also supplies transformers of this kind for heating and upsetting work.

Like the rest of the TECNA range, the 32778 is liquid cooled and has an epoxy resin body. The coolant takes heat from the windings and the secondary turn during frequent weld cycles, while the resin shields the assembly from vibration, damp and workshop dust. The coolant circuit should be commissioned before the machine is first run.

TECNA produces this unit in Italy and conforms it to ISO 5826, ISO 10656 and ISO 22829. The wider programme spans single-phase alternating current models up to 400 kVA, three-phase direct current transformers up to 1500 kVA and inverter direct current units up to 664 kVA. The company also manufactures special transformers for specific welding tasks.

Selecting a 32778 for a machine requires the mains voltage, the secondary voltage, the mounting footprint and the busbar arrangement. TECNA states 36 kVA for this code and confirms the other parameters on request. When replacing an older unit, a photo of the nameplate makes the comparison much quicker. Keep secondary connections clean and tight, and check the contact faces regularly, because even small losses at the joints reduce the current reaching the electrodes.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)32778
Typesingle-phase welding transformer for resistance welding
Power36 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin cast
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding of thin sheet and small parts, heating, upsetting

Request a price and lead time

TECNA 32778 single-phase welding transformer 36 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power rating of the TECNA 32778?

The manufacturer lists 36 kVA for the 32778 on a single-phase alternating current supply. TECNA confirms the primary and secondary voltages against the model code.

Which standards does the TECNA 32778 meet?

TECNA builds the 32778 to ISO 5826, ISO 10656 and ISO 22829. The windings are cast in epoxy resin.

Can the 32778 replace an older transformer?

It can if the 36 kVA rating, the secondary voltage and the mounting dimensions match. A photo of the old nameplate lets the fit be checked.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides