International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 32725 Single-Phase Welding Transformer, 63 kVA

TECNA 32725 is a single-phase alternating current transformer rated at 63 kVA for resistance welding machines. Liquid cooling and an epoxy resin casting are combined with conformity to ISO 5826, ISO 10656 and ISO 22829. The unit is made in Italy.

Brand
TECNA
Country of manufacture
Italy
Model
32725
Type
single-phase welding transformer

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The 32725 is a 63 kVA single-phase transformer for alternating current, intended for resistance welding machines. It belongs to the lower section of TECNA's single-phase range, which climbs to 400 kVA. Other TECNA transformers carry a 63 kVA rating under different model codes, so the 32725 designation must be confirmed when selecting, since the power figure does not distinguish one variant from another.

A liquid cooling circuit carries away the heat generated in the windings during repeated welding cycles. The windings are sealed in cast epoxy resin, which insulates them and secures the transformer body inside the machine. Both solutions are used throughout the TECNA transformer range, including this model.

The 32725 is built to ISO 5826, ISO 10656 and ISO 22829. These standards can be referenced in a machine specification, so the requirements for the transformer do not have to be described from scratch.

TECNA has produced transformers for resistance welding for over 40 years and manufactures them wholly in Italy. The single-phase alternating current models, to which the 32725 belongs, go up to 400 kVA. The company also supplies three-phase direct current transformers up to 1500 kVA, inverter direct current units up to 664 kVA and special transformers for heating and upsetting.

The supply voltage and the required secondary voltage must be stated when ordering, because TECNA builds units with different primary and secondary voltage combinations. Its raw materials come exclusively from certified suppliers that the company works with regularly.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model32725
Typesingle-phase welding transformer
Current typealternating current
Power (kVA)63 kVA
Coolingliquid
Winding insulationcast epoxy resin
StandardsISO 5826, ISO 10656, ISO 22829
Applicationresistance welding machines

Request a price and lead time

TECNA 32725 Single-Phase Welding Transformer, 63 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power rating of the TECNA 32725?

The rated power is 63 kVA. It is a single-phase unit for alternating current, within a line that reaches 400 kVA.

Does the transformer need liquid cooling?

Yes, the 32725 is liquid cooled and connects to the cooling circuit of the machine, with its windings encapsulated in cast epoxy resin.

Which standards apply to the 32725?

The unit is built to ISO 5826, ISO 10656 and ISO 22829 for resistance welding equipment.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides