International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 32696 single-phase welding transformer 100 kVA

The TECNA 32696 is a 100 kVA single-phase transformer for heavy resistance welding machines, made in Italy. It suits press-type spot welders, projection welding of thicker sheet and heating or upsetting work. Liquid cooling and epoxy resin cast windings are fitted, and the design follows ISO 5826, ISO 10656 and ISO 22829.

Brand
TECNA
Country of manufacture
Italy
Model (code)
32696
Type
single-phase transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

At 100 kVA the 32696 stands apart from most neighbouring single-phase models in the TECNA range. It belongs in heavy stationary machines that need a large welding current and high electrode force. The circuit is single-phase and the current is alternating.

Transformers of this rating drive press-type machines for projection welding of nuts, bolts and brackets, spot welding of thicker sheet, and heating or upsetting installations. A machine built around this unit normally gets its own supply line and a coolant circuit sized for the flow it needs. The welding controller is matched to the transformer rating and to the load pattern.

The 32696 is liquid cooled and its windings are cast in epoxy resin, the same construction used across TECNA's welding transformers. The resin keeps out moisture, dust and splashes, while the coolant holds the coil temperature steady during repeated cycles. The unit should not be energised until the coolant circuit is connected and checked.

TECNA states that its single-phase alternating current transformers reach up to 400 kVA, its three-phase direct current models up to 1500 kVA and its inverter types up to 664 kVA. The 32696 follows ISO 5826, ISO 10656 and ISO 22829, and special units are available for non-standard tasks. Every unit is made in Italy.

The model code alone is not enough for an exact selection, so the mains voltage, secondary voltage, machine type and cooling arrangement should be given to TECNA with your enquiry. The manufacturer confirms the other parameters against the code. For a replacement, send a photo of the nameplate. At each planned service, keep the coolant clean and free of scale and check the secondary connections and primary contacts, because blocked channels and loose bolts are the usual cause of overheating.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)32696
Typesingle-phase transformer for resistance welding
Power100 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin cast
StandardsISO 5826, ISO 10656, ISO 22829
Applicationspress-type spot and projection welding machines, heating, upsetting

Request a price and lead time

TECNA 32696 single-phase welding transformer 100 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the power rating of the TECNA 32696?

The manufacturer lists 100 kVA for the 32696 on a single-phase alternating current supply. TECNA confirms the primary and secondary voltages against the model code.

Which standards does the TECNA 32696 meet?

TECNA builds its transformers to ISO 5826, ISO 10656 and ISO 22829. The windings are cast in epoxy resin.

Which machines take a 100 kVA transformer?

The 32696 is fitted to press-type spot and projection welding machines for thicker sheet and nuts. TECNA also uses this type of transformer for heating and upsetting.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides