
TECNA 32301 single-phase welding transformer, 32 kVA
The TECNA 32301 is a 32 kVA single-phase transformer for resistance welding machines. It is liquid cooled, has epoxy resin encapsulated windings and is made in Italy. It suits thin sheet and small parts.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model (code)
- 32301
- Type
- single-phase transformer for resistance welding
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The TECNA 32301 sits at the lower end of the single-phase range, rated 32 kVA. Compared with the higher codes in the series it has smaller dimensions and places a lighter load on the workshop network, which is why it goes into machines that weld thin sheet and small parts. The circuit is single-phase and runs on alternating current, like the other single-phase TECNA transformers.
Transformers of this rating usually go into benchtop and portable machines, into machines with a swinging rocker arm and into small spot welding stations. Typical work for the 32301 includes spot welds on thin steel, small brackets, mesh, wire and parts for domestic appliances and housings. TECNA also uses transformers of this type for heating and for upsetting small blanks.
The windings of the 32301 are sealed in epoxy resin and the unit is liquid cooled. TECNA uses this build across its transformer line: the resin shields the windings from moisture, dust and spatter, and the coolant holds the temperature steady through frequent weld cycles. The transformer is not put into service until the coolant circuit is connected.
For single-phase alternating current transformers TECNA covers a power range up to 400 kVA, for three-phase direct current units up to 1500 kVA and for inverter units up to 664 kVA. The 32301 meets ISO 5826, ISO 10656 and ISO 22829. Special transformers for non-standard jobs are made by the manufacturer on request.
For an accurate match to the 32301, the mains voltage, the secondary voltage, the machine type and the cooling data are needed, while the model code alone is enough to start a request. The manufacturer publishes a 32 kVA rating, and the other figures come from TECNA's technical sheet. Another single-phase transformer of the same 32 kVA rating exists in TECNA's catalogue under a different code, so for a replacement rely on the 32301 code and the nameplate. In service, keep the coolant clean and free of scale, check that the secondary busbar joints are tight and that the primary contacts are dry. Overheating is most often caused by blocked cooling channels or loose busbar bolts, so inspect them during scheduled machine maintenance and flush the channels once a season.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model (code) | 32301 |
| Type | single-phase transformer for resistance welding |
| Power | 32 kVA |
| Technology | single-phase, alternating current |
| Cooling | liquid |
| Winding insulation | epoxy resin encapsulation |
| Standards | ISO 5826, ISO 10656, ISO 22829 |
| Applications | resistance welding machines for thin sheet, heating, upsetting |
Request a price and lead time
TECNA 32301 single-phase welding transformer, 32 kVA. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What is the rating of the TECNA 32301 transformer?
The manufacturer gives 32 kVA for model 32301, and the technology is single-phase on alternating current. TECNA confirms the primary and secondary voltages from the model code.
Which standards does the TECNA 32301 meet?
TECNA makes its transformers to ISO 5826, ISO 10656 and ISO 22829. The windings are encapsulated in epoxy resin.
Where is the 32301 manufactured?
TECNA transformers are made entirely in Italy. The windings are sealed in epoxy resin and the cooling is liquid.
Similar equipment from other manufacturers






