International supply. Engineering expertise.
office@usk.ua09:00–18:00 · Kyiv

TECNA 32048 single-phase welding transformer, 80 kVA

The TECNA 32048 is an 80 kVA single-phase transformer for resistance welding machines. Its windings are epoxy resin encapsulated, it is liquid cooled and it is made in Italy. It suits stationary spot welding machines for sheet steel.

Brand
TECNA
Country of manufacture
Italy
Model (code)
32048
Type
single-phase transformer for resistance welding

Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.

Description

The TECNA 32048 is one step above the mid-range models, with a rating of 80 kVA. A unit of this size is chosen for machines that run longer current times, weld galvanised or thicker sheet, or work with longer arms, where losses in the secondary loop grow. The technology is single-phase, on alternating current.

A machine that needs about 80 kVA usually has a rocker-arm or pneumatic head for spot welding sheet steel. How much current reaches the electrodes depends on the arm reach, so a longer arm or a wider transformer window calls for a larger safety margin.

The TECNA 32048 has the usual TECNA construction, with liquid cooling and epoxy resin encapsulated windings. A sealed winding handles vibration, damp and workshop dust better, and the coolant takes heat from the windings and the secondary turn during repeated production cycles. A cooling circuit with the right flow must be fitted before installation.

Standards for this unit are ISO 5826, ISO 10656 and ISO 22829, shared with the rest of the TECNA line. Beyond the single-phase alternating current models, which top out at 400 kVA, the manufacturer produces three-phase direct current transformers up to 1500 kVA and inverter direct current units up to 664 kVA.

Once in the machine, the control unit switches on the primary winding through thyristors for a set time. The secondary side, joined to the arms and electrodes through busbars, delivers high current at low voltage. Busbar section, arm length and window area together set how much of the rating actually arrives at the weld point. Only the 80 kVA figure appears on the manufacturer's page, so voltages, dimensions and mass are obtained from TECNA using the model code, together with the mains supply voltage and the machine type.

Technical specifications

BrandTECNA
Country of manufactureItaly
Model (code)32048
Typesingle-phase transformer for resistance welding
Power80 kVA
Technologysingle-phase, alternating current
Coolingliquid
Winding insulationepoxy resin encapsulation
StandardsISO 5826, ISO 10656, ISO 22829
Applicationsresistance welding machines, heating, upsetting

Request a price and lead time

TECNA 32048 single-phase welding transformer, 80 kVA. We reply within one business day.

* — required fields

Or email sales@usk.ua or call 044 339-50-20.

Questions and answers

What is the rating of the TECNA 32048 transformer?

The manufacturer gives 80 kVA for model 32048, with single-phase alternating current technology. TECNA provides the primary and secondary voltages against the model code.

Is separate cooling needed?

Yes, every TECNA transformer is liquid cooled, so the machine has to be hooked up to a coolant circuit.

What is needed to choose a replacement?

The code 32048 from the nameplate, the mains voltage and the machine type. Units of the same rating can have different winding voltages.

Similar equipment from other manufacturers

LET’S CONNECT

Let’s start with your challenge.

Complete a short brief. We will prepare an email you can send from your own email app.

Call us044 339-50-2009:00–18:00
USK ENERGY / SEARCH

Search

Solutions, specialist directions and guides