
TECNA 2144D Bench Projection Welder, 150 kVA, 58 kA Short-Circuit Current
The TECNA 2144D is a bench projection welder rated at 150 kVA in the 2101D:2144D series, giving a short-circuit current of 58 kA. Its electrode force reaches 1242 daN and its maximum throat depth is 230 mm.
- Brand
- TECNA
- Country of manufacture
- Italy
- Model
- 2144D
- Series
- 2102N / 2101D:2144D
Price, availability and lead time on request. We help with analogue selection, customs clearance and delivery.
Description
The 2144D is set up for projection welding at a rating of 150 kVA, with a short-circuit current of 58 kA. Its thermal current is 9.2 kA, and the transformer offers three secondary voltage steps: 9 V, 10.2 V and 11.5 V. Electrode forces of 1242 daN and 736 daN are specified, and the maximum throat depth is 230 mm.
Short-circuit current indicates how much the machine can deliver in a brief pulse across closed electrodes, and projection welding relies on exactly that reserve. Raised embossments are pre-formed on the parts, and a single stroke of the head compresses and welds them together, so the current divides between several contact points. The higher force of 1242 daN helps all the projections settle evenly.
Welding current is controlled by a synchronous SCR thyristor contactor. It is isolated from the water-cooling circuit and carries a protective thermostat. Current is adjusted by phase shift, meaning the moment at which the thyristors fire is changed in every half-cycle of the mains, while the secondary voltage steps give a coarse selection before the fine tuning.
Water cools the transformer, electrode holders and electrodes, and the transformer windings are coated in epoxy resin that guards them against moisture. The pneumatics run without lubrication, so no oil mist forms at the workplace. The chrome-plated cylinder and stem are built for heavy duty and long service, the anti-rotation device is adjustable, and a built-in compressed air filter is fitted.
The manufacturer does not name the control unit for this model on its product page, so the control set and the two-hand guarding buttons are confirmed for each specific order. A two-step electric pedal clamps the part first and starts welding only once the part is correctly positioned. The bench machine is intended for parts fed by hand in serial contact welding work.
Technical specifications
| Brand | TECNA |
|---|---|
| Country of manufacture | Italy |
| Model | 2144D |
| Series | 2102N / 2101D:2144D |
| Machine type | bench-mounted |
| Welding type | Projection welding |
| Power | 150 kVA |
| Secondary voltage | 9 V, 10.2 V, 11.5 V |
| Short-circuit current | 58 kA |
| Thermal current | 9.2 kA |
| Electrode force | 1242 daN, 736 daN |
| Max. electrode throat depth | 230 mm |
| Current control | phase shift, synchronous SCR contactor with thermostat |
| Cooling | water: transformer, electrode holders, electrodes |
Request a price and lead time
TECNA 2144D Bench Projection Welder, 150 kVA, 58 kA Short-Circuit Current. We reply within one business day.
Or email sales@usk.ua or call 044 339-50-20.
Questions and answers
What current does the TECNA 2144D deliver?
A short-circuit current of 58 kA and a thermal current of 9.2 kA at a power rating of 150 kVA.
Is the electrode force enough for parts with several projections?
The manufacturer lists 1242 daN and 736 daN. The higher figure gives a margin so that all the projections settle evenly.
How is the welding current adjusted?
In coarse steps through the 9 V, 10.2 V and 11.5 V secondary voltages, then finely by phase shift through a synchronous SCR contactor.
Similar equipment from other manufacturers






